Screen Lock Protection; Locking The Home Screen - Siemens RDS110.R User Manual

6
Operating the thermostat on the device

Screen lock protection

6.4 Screen lock protection

6.4.1 Locking the home screen

28 | 60
– Note: To customize the current network settings, tap "Manual", select a
field, or tap or
setting.
– again to enter "Advanced Bacnet setting" page. You can manually
Tap
change the BACnet ID or enable/disable a foreign device. You can also
modify BBMD related information if a foreign device is enabled.
Connecting to a network via push button
If you have little knowledge about wireless security, using the push button method
makes it easy for you to establish a secure wireless network connection. If you
want to use this method, you must have a WPS (Wi-Fi Protected Setup) compatible
router.
Connect to a network using the push button
1. If the thermostat is selected for commercial use:
– On the "Advanced Settings" page, tap
"Push Button Setup".
2. If the thermostat is selected for home use:
– On the "Settings" page, tap
Button Setup".
3. Tap "Push Button Setup", and then press the WPS button on your WPS-
supported router to start the discovery of your thermostat.
4. On the thermostat, tap
5. Tap "OK" once the thermostat is successfully connected to the network.
Whether the thermostat is selected for commercial or home use, you can set a
numeric screen code to lock the home screen and prevent misuse of the
thermostat.
Apart from using the screen code to unlock the screen, you can also use an
administrator password (if you've set one) to unlock the screen.
Create a screen lock code
1. On the Home screen, tap
> "Activate". Enter a code consisting of six numbers, and then tap
2. Tap >
"OK".
3. Tap "OK" again to confirm.
Unlock the home screen
● On the Home screen, enter the screen lock code directly and then tap "OK".
● If you've set an administration password, tap the question mark on the screen,
and then tap "Log in as administrator".
NOTE: There is no limit of attempts to enter the numeric code. If you cannot
remember the screen lock code, you can use the administrator password (if you've
set one) to unlock the screen. For more information, see What should I do if I forget
the screen lock code? [➙ 54]
to scroll to the desired field, and then enter a new
>
> > , then tap
> "Connect".
, then tap .
, then tap until you see
until you see "Push
A6V11562455_en--_d