Operating The Thermostat From The Mobile Application; Downloading The Application; Account Creation And Pairing - Siemens RDS110.R User Manual

9 Operating the thermostat from the mobile

9.1 Downloading the application

9.2 Account creation and pairing

A6V11562455_en--_d

Operating the thermostat from the mobile application

application
You can download the "Siemens Smart Thermostat RDS" application from Google
Play or App Store.
Create an account and associate it with thermostat(s) for wireless control.
Create an account in the application and associate it with the
thermostat(s)
 The thermostat is connected to a network.
1. Tap "Create account" in the "Log in" page.
2. Enter a valid email address.
3. On the local thermostat, do one of the following:
–
From the Home screen of the thermostat, tap
. The activation code and QR code are displayed.
–
If is available on the Home screen, tap it and then tap . The activation
code and QR code are displayed.
4. In the app, scan the QR code using the built-in scanner or enter the activation
code manually.
5. Agree to the terms of use, then tap "Create". A confirmation email is sent.
6. Enter the code enclosed in the confirmation email, set a password for the
account, then tap "Activate".
7. To associate additional thermostats with the account, tap
device", and add devices by scanning the corresponding QR codes.
 The added devices are listed in the default location. See Configuring device
locations [➙ 50] to move them to the desired locations.
After initial power-up of the thermostat and initial system configuration, tap
create an account and associate the mobile application. Refer to the
for detailed information.
After reconfiguring the thermostat, log out and return to the app before the
changes take effect. If the changes still don't take effect, try to revoke access to
the device and add it again.
Account management
Once an account is created, make the following changes as needed:
●
Change account user name
●
Change display language
●
Change temperature unit
Downloading the application
, tap , tap and then tap
> "Setup" > "Add
quick guide
9
to
45 | 60