Logosol B751 PRO User Manual
Trailer kit 1300 kg
Hide thumbs
Also See for B751 PRO:
- User manual (48 pages) ,
- User manual (16 pages) ,
- User manual (8 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Logosol B751 PRO
Summary of Contents for Logosol B751 PRO
- Page 1 USER MANUAL SKU 0458-395-0711 REV: 1 TRAILER KIT 1300 KG B751 PRO / B1001...
- Page 2 We are very pleased that you have demonstrated your confidence in us by purchasing this machine, and we will do our utmost to meet your expectations. Logosol has been manufacturing sawmills since 1989, and in that time we have supplied approximately 50,000 sawmills to satisfied customers all over the world.
- Page 3 TRAILERKIT 1300 KG TABLE OF CONTENTS Safety instructions Components Component parts Assembly...
-
Page 4: Safety Instructions
• Only add extra equipment to the sawmill that is made by Logosol or that is specifically approved by Logosol for the purpose. Other equipment may result in risk of accident and must not be used. - Page 5 TRAILERKIT 1300 KG SAFETY INSTRUCTIONS WORK SITE MOVING THE BAND SAWMILL WARNING! Never operate a band sawmill WARNING! Risk of crush injuries. with a combustion engine in a closed or poorly ventilated area. Doing so can cause death by When lifting and moving machine parts, keep asphyxiation or carbon monoxide poisoning.
- Page 6 Rail connection 04-00556 Hair Pin Wiberger hns 3 04-00557 Bolt 12x80 Wiberger sms 2360 04-00577 Trailer jockey Ø200x50 (ALKO 1224351) 04-00576 Jockey wheel-clamp (ALKO 01-00) (B1001: 02-00366) B751 PRO: 02-00417 Crossbunk 02-00368 Drawbar 03-02279 Drawbar Bracket Left 03-02278 Drawbar Bracket Right...
- Page 7 TRAILERKIT 1300 KG 02-00368 02-00392 B1001 B751 PRO 01-00668 02-00416 02-00366 B1001 02-00417 B751 PRO Upon delivery, verify that all component parts are included. 04-00558 03-03160 04-00559 04-00560 B1001 04-00588 B751 PRO 02-00494 03-02342 03-02343 02-00477 03-02344 03-03008 04-00589 V, 03-02279...
- Page 8 01-00668 M12x100 M10x65 20 x M12x90 NV18 M12x140 M8x12 M8x20 M8x25 M12x30 01-00668-skp 24 x M12 NV18 24 x Cylindrical bolt 12x80 Hairpin cotter M8x16 M8x16 01-00737-skp...
-
Page 9: Additional Symbols
TRAILERKIT 1300 KG 8310-001-0110 03-02649 03-02648 M6x35 03-02459 01-00570 03-02488 BOLTS/NUTS Definition of the fasteners on the previous page. Shoulder bolt Allen screw Cross screw Allen screw (partially threaded) Hex bolt Slotted screw Locking screw Hex bolt (partially threaded) Hex nut Flange bolt Flange nut Flange bolt (partially threaded) - Page 10 8310-001-0110 Start the assembly by installing the new anti-tip protectors. Install the new tip protection strips with the bolts/ screws that hold the rails. Note that assembly begins and ends with the ‘end pieces’ Be careful not to unscrew the bolts/screws too much, as this could cause the nuts to fall out.
- Page 11 TRAILERKIT 1300 KG 8310-001-0110 Safely and appropriately raise the rail so that the underside of the rail tubes is 400 mm from the ground. This is the 400 mm lowest clearance that allows assembly of the support legs. 400 mm Standard version with trailer kit.
- Page 12 8310-001-0050 01-00614-skp – 8 x – M10x70 8 x – M10 B1001 B1001 B751 PRO B751 PRO 4 x – M12x100 NV18 4 x – M12 4 x – M12...
- Page 13 TRAILERKIT 1300 KG 01-00668 01-00668-skp – 78,5mm 20 x M12x90 NV18 20 x M12 NV18 Use the existing parts from the sawmill. M8x10...
- Page 14 01-00668 Dismantle the end plate and the end piece at the end of the rail pipe. Note that the drawbars for the trailer kit must be mounted at the end of the rails (in terms of the saw direction). Install the reinforcement at the first hole pattern in from the rail end.
- Page 15 TRAILERKIT 1300 KG 01-00668 M10x65 POSITION OF THE DRAWBARS Place the carriage drawbar in the outer position for transport. The drawbar can be removed when sawing if it is considered to be in the way.
- Page 16 Install the wheel axle mounts on the rails. Note the longitudinal position on the rail during assembly. Mount the brackets on the third rail pipe, hole pair 2. M12x90 78,5mm Mount the fenders. Note that they are attached as ‘right’ and ‘left’. 01-00737-skp 10 x M8x16...
- Page 17 TRAILERKIT 1300 KG 01-00668 Mount the fittings for the sawhead’s lock- ing mechanism on the main posts. Note that on the exhaust side of the sawhead, a spacer must be mounted between the locking plate and the main post. M8x25 Mount the fittings for the sawhead’s locking mechanism on the bottom plate of the respective main posts.
- Page 18 01-00668 M12x100 78,5mm M8x20 1. Transport mode: During transport, mount the fittings for the sawhead’s locking mechanism on the bottom plate of the respective rail pipes. 2. Working mode: When the saw is in use, the fitting is positioned as shown in the image.
- Page 19 TRAILERKIT 1300 KG ENSURE THAT THE RAIL IS LEVEL To ensure good functioning of the rails, it is important that they be completely level. Adjust the rail horizontally along the short side. Position the sawmill so that the wheels are level with each other. Verify this with the help of a spirit level.
-
Page 20: Declaration Of Conformity
Fiskaregatan 2 Tel. +46 611 18285 871 33 Härnösand hereby declares that Logosol Trailer kit hereby declares that Logosol Trailer Kit 1300 kg 1300 kg for B751 PRO / B1001 for B751 PRO / B1001 has been manufactured in conformity with:...