Logosol B1001 User Manual
Support legs
Hide thumbs
Also See for B1001:
- User manual (64 pages) ,
- User manual (12 pages) ,
- User manual (20 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Logosol B1001
Summary of Contents for Logosol B1001
- Page 1 USER MANUAL Ref. No. 0458-395-2221 SUPPORT LEGS B1001/B751PRO...
- Page 2 We are very pleased that you have demonstrated your confidence in us by purchasing this product, and we will do our utmost to meet your expectations. Logosol has been manufacturing sawmills since 1989. In that time we have supplied approximately 50,000 machines to satisfied customers the world over.
-
Page 3: Safety Instructions
• Only add extra equipment to the sawmill that is made by Logosol or that is specifically approved by Logosol for the purpose. Other equipment can cause accidents and should not be used. Logosol will not... -
Page 4: Additional Symbols
COMPONENTS Check that all components are included in the shipment. B1001 02-00394 B751 PRO 02-00424 M12 NV18 01-00509 M12 x 90 Nv 18 BOLTS & NUTS Definition of fasteners. Shoulder bolt Allen bolt Phillips bolt Partial thread Allen bolt Hex bolt... - Page 5 LOG HANDLING ASSEMBLY Start assembling by raising the rails in a safe and effective way, until the rail tubes are 400 mm above the ground. This is the minimum clearance required to fit the support legs. 400mm 400mm Recommended positions of the support legs on the rail frame.
- Page 6 ASSEMBLY Fit the original sawmill feet to the bottom plates of the support legs. Note the inverted flange nuts holding the feet. M12x 90 20 mm...
- Page 7 LOG HANDLING ASSEMBLY ADJUSTING THE LEVELNESS OF THE RAIL FRAME To ensure a good sawing result, it is important that the rails are completely level with eachother. Place a spirit level on a cross bunk and adjust the levelling feet until the rails are on a level.
- Page 8 Fiskaregatan 2, 871 33 Härnösand, SWEDEN + 46 611 182 85 | info@logosol.com | www.logosol.com...