Delta DVP-SV Instruction Sheet page 3

 Electrical Specifications
Model
Item
Power supply
voltage
Inrush current
Fuse capacity
Power
consumption
Insulation
resistance
Noise immunity
Grounding
Operation /
storage
Agency approvals
Vibration /
shock immunity
Weight (g)
Spec.
Items
Input No.
Input voltage (±10%)
Input impedance
OffOn
Action level
OnOff
OffOn
Response
time
OnOff
Filter time
Note: 24SV2 does not support X12~X17.
#1: For products with a hardware version later than A2, the inputs X10, X11, X14, X15 should be
operated at the 200kHz rate. The firmware + hardware version can be found on the sticker
label of the product, e.g. V2.00A2.
Spec.
Items
Output No.
Max. frequency
Working voltage
Max. load Resistive
Inductive
Max. load
Lamp
OffOn
Response
time
OnOff
#1: For a PNP output model, UP and ZP must be connected to a 24VDC (-15% ~ +20%) power
supply. The rated consumption is 10mA/point.
DVP 28 SV11R DVP 28 SV11R2
24VDC (-15% ~ 20%) (with counter-connection protection on the polarity
of DC input power)
Max. 2.2A@24VDC
2.5A/30VDC, Polyswitch
6W
> 5MΩ (all I/O point-to-ground: 500VDC)
ESD (IEC 61131-2, IEC 61000-4-2): 8kV Air Discharge
EFT (IEC 61131-2, IEC 61000-4-4): Power Line: 2kV, Digital I/O: 1kV,
Analog & Communication I/O: 1kV
Damped-Oscillatory Wave: Power Line: 1kV, Digital I/O: 1kV
RS (IEC 61131-2, IEC 61000-4-3): 26MHz ~ 1GHz, 10V/m
The diameter of grounding wire shall not be less than that of the wiring
terminal of the power. (When PLCs are in use at the same time, please
make sure every PLC is properly grounded.)
Operation: 0ºC ~ 55ºC (temperature); 5 ~ 95% (humidity);
pollution degree 2
Storage: -25ºC ~ 70ºC (temperature); 5 ~ 95% (humidity)
UL508
European community EMC Directive 89/336/EEC and Low Voltage
Directive 73/23/EEC
International standards: IEC61131-2, IEC 68-2-6 (TEST Fc)/IEC61131-2 &
IEC 68-2-27 (TEST Ea)
260
200kHz
X0, X1, X4, X5,
X10, X11, X14, X15
> 5mA (16.5V)
< 2.2mA (8V)
< 150ns
Adjustable within 10 ~ 60ms by D1020, D1021 (Default: 10ms)
Relay
Y0 ~ Y7, Y10 ~ Y13
1Hz
250VAC, < 30VDC
1.5A/1 point (5A/COM)
#2
20WDC/100WAC
Approx. 10ms
DVP 28 SV11T
260 240
Input Point
24VDC single common port input
#1
24VDC, 5mA
3.3kΩ
< 3μs
Output Point
High-speed
Y0 ~ Y4, Y6
200kHz
0.2μs
0.2μs
- 2 -
DVP 24 SV11T 2
DVP 28 SV11S 2
DVP 28 SV11T 2
240
10kHz
X2, X3, X6, X7, X12, X13, X16,
X17
4.7kΩ
> 4mA (16.5V)
< 1.5mA (8V)
< 8μs
< 60μs
Transistor
Low-speed
Y5, Y7, Y10 ~ Y13
10kHz
5 ~ 30VDC
#1
0.3A/1 point @ 40˚C
9W (30VDC)
1.5W (30VDC)
20μs
30μs
230