Table of Contents
Advertisement
A Chart Recorder (when ordered as an option) in the control box records the
temperature of each thermocouple. The recorder is factory programmed. A
toggle switch is there to cut power to the recorder if desired.
• Charts operate 24/7.
overlap past data.
information on Dual Pen Universal Ink Style. Page 14 is significant. Simply
open the face, press pad "3", and wait for pens to relocate, be patient. When
action has stopped unscrew center nut holding chart, place new chart on and
align day/time, screw nut down to hold in place. Press pad "3" again. Close
recorder face.
• The recorder has an indicator light too. Field reprogramming is possible by
using a provided blank setup chart and following the instructions printed on it.
Also see complete FDC CHART RECORDER USER MANUAL for recorder to
familiarize. Refer to information in that manual for Dual Pen Universal Ink
Style. Page 20 is significant.
see how it works the next attempt will only take a couple minutes. A 9v battery
may be installed on the recorder, it will continue to track temperature if power is
lost. Life is about 2 days.
on/off indicating low battery volts or no battery.
when the battery is proper.
P77-3 SC30 Manual 9.27.2019
CHART RECORDER (optional)
Each week the chart needs to be replaced or the ink will
See user manual for Recorder to familiarize. Refer to
First attempt may take 15 minutes, once you
Note the small green led on the recorder may flash
Page 47
The led will be steady green
Advertisement
Table of Contents
