Magicard PRIMA401 User Manual page 66

Setup
Windows Vista
A [AutoPlay] screen appears.
.
Clicking [Run SETUP.exe] displays the [User Account Control]
screen.
Clicking [Allow] displays the card printer setup screen.
2
Select the [Printer Driver] checkbox on the card printer setup screen
A Select the language to use from the [Language] pull-down menu
Selecting [Japanese] switches the program to the Japanese
version.
Selecting [English] switches the program to the English version.
B Select [USB connection] from [Interface]
C Select [Install] under [Action], and select the [Printer Driver]
checkbox
Memo:
You can select the [Status Monitor] and [Electronic Manual]
checkboxes to install them simultaneously. Selecting all checkboxes
starts installation in the order of the Electronic Manual, printer driver,
and status monitor.
The same status monitor can be used for printers connected via
USB and Ethernet.
Clicking [Open the Electronic Manual] opens the Electronic
Manual.
Clicking [Exit] ends the installation.
3
Click [Next]
A [Installation of CX-D80 USB printer] screen appears.
.
4
Read through the "Software License Agreement"
If you accept the terms and conditions, select [I agree] to start
installation.
If you do not agree, click [Cancel] to stop the installation.
66
5
Click [Next]
A start installation screen appears.
.
6
Check the details, followed by clicking [Next]
A screen for setting [Printer model] and [Printer name] appears.
.
A Select a [Printer model] according to the unit number of the printer
"Unit Number Setting" (A page 28)
Select a [Printer model] according to the unit number of the
printer. Installation may fail if the combination is incorrect.
Printer Unit Printer Model
Number Options
1 (Factory CX-D80 U1
Setting)
2 CX-D80 U2
3 CX-D80 U3
4 CX-D80 U4
5 CX-D80 U5
6 CX-D80 U6
7 CX-D80 U7
8 CX-D80 U8
9 CX-D80 U9
10 CX-D80 U10
B Enter the [Printer name]
C Select the [Make this the default printer.] checkbox if necessary
Memo:
Doing so enables you to set it as a default printer after installation
is complete.
7
Click [Next]
A screen for entering the shared name appears.
USB Device Name
CX-D80 U1
CX-D80 U2
CX-D80 U3
CX-D80 U4
CX-D80 U5
CX-D80 U6
CX-D80 U7
CX-D80 U8
CX-D80 U9
CX-D80 U10