Epever XTRA-N Series User Manual page 26

4.3 Accessories (optional)
Remote temperature sensor
(RTS300R47K3.81A)
USB cable RS 485
CC-USB-RS485-150U
OTG cable
OTG-12CM
Remote meter
MT50
RS 485 to Bluetooth adapter
eBox-BLE-01
Data logger
eLOG01
NOTE: Refer to the accessory user manual for accessory settings and controls.
Battery temperature sensor for temperature compensation for control
parameters, standard cable length is 3 m (length can be adjusted).
RTS300R47K3.81A connects to port (4.) on the controller.
NOTE: If the temperature sensor is shorted or damaged, the controller will
charge or discharge at the default temperature setting of 25ºC.
A USB to RS-485 converter is used to monitor the controller using the Solar
Station computer software. The cable length is 1.5 m.
The CC-USB-RS485-150U connects to the RS-485 port on the controller.
It is used to connect the controller to a mobile phone and allows real-time
monitoring of the controller and parameter changes using a mobile software
application.
The MT50 can display various operational and system fault information.
Information can be displayed on the backlit LCD screen, the buttons are easy to
operate and the numeric display is easy to read.
After connecting the controller to the eBox-BLE-01 using a standard Ethernet
cable (parallel cable), the operating status and related
controller parameters monitored in the app via Bluetooth.
Once the controller is connected to the eLOG-01 via the RS 485 communication
cable, it can record controller operating data or monitor the operating status
controller in real time using PC software.
24