Epever XTRA-N Series User Manual page 18

Procedure:
Step 1: Press the button for the settings interface.
Step 2: Press and hold the button for 5 seconds for the battery type interface.
Step 3: Press the button twice for the temperature unit interface.
Step 4: Press the button orto adjust the temperature units.
Step 5: Press the button to confirm the parameters.
LCD cycle time
4)
NOTE: The default LCD cycle time is 2 s, the setting time range is 0~20 s.
Procedure:
Step 1: Press the button for the settings interface.
Step 2: Press and hold the button for 5 seconds to interface the LCD cycle time.
Step 3: Press the button or to set the LCD cycle time.
Step 4: Press the button to confirm the parameters.
Load mode
5)
16