Epever XTRA-N Series User Manual page 17

Procedure:
Step 1: Press the button for the settings interface.
Step 2: Press and hold the button for 5 seconds for the battery type interface.
Step 3: Press the button or
Step 4: Press the button to confirm the selected battery type.
ATTENTION ：For information about the battery voltage setting of the
controller, please refer to chapter 4.1 if the battery type is User.
Battery capacity
2)
Procedure:
Step 1: Press the button for the settings interface.
Step 2: Press and hold the button for 5 seconds for the battery type interface.
Step 3: Press the button for the battery capacity interface.
Step 4: Press the button or
Step 5: Press the button to confirm the parameters.
Temperature units
3)
to select the battery type.
to set the battery capacity.
15