Support - Free2Move eSolutions ePublic User Manual

The equipment may not be used for any purpose other than that its
intended use. The equipment must not be used by inexperienced
personnel, or even by expert personnel if operations are carried out on
the equipment that do not comply with this manual and the
accompanying documentation.
This equipment is a charging station for electric vehicles; the following classification
(according to IEC 61851-1) identifies its characteristics:
Power supply: permanently connected to the AC power supply grid

Output: alternate current

Environmental conditions: outdoor use

A device for free access places

Fixed installation on the ground

Protection against electric shock: Class I

Charging type: Mode 3 according to the IEC 61851-1 standard

Optional function for ventilation not supported

In case of installation in TN-type earthing systems, there may be
additional specific local regulations regarding system safety and
protection against faults that the installer must understand and implement.
The device may only be connected to the mains in countries for which it has
been certified / approved.
1.2.

Support

For any further information or requests for further support, Free2Move eSolutions
S.p.A. is available through the dedicated section of the website:
www.esolutions.free2move.com/low-power-charging-solutions/ePublic
or by writing to: epublic@f2m-esolutions.com .
GB
6