Table of Contents
Advertisement
12/16/22, 5:03 PM
Description
No local or Internet connection
Installation
Service provider technician - MobileTech installation
1. Log in to the MobileTech app.
2. Select the customer account.
3. Tap Quick Actions.
4. Tap Add Device.
5. Tap Video.
6. Follow the on-screen instructions.
Ethernet mode
Complete these steps prior to installing the camera in its nal location:
1. Connect the camera to the router using an Ethernet cable.
2. If the Ethernet connection does not provide power, connect the camera to the optional AC power adapter (sold separately), and plug the adapter into a non-switched outlet.
3. Wait 2 minutes for the camera to boot up and connect to the Internet. The LED will be solid green when this process is complete.
4. Add the device to the account by either selecting the account using the MobileTech app or by using a web browser and entering the following URL:
www.alarm.com/addcamera (you will need the customer username and password).
5. Select the camera from the video device list or enter its MAC address to begin adding the camera. The camera's MAC address is located on the bottom of the device or on
the packaging.
6. Follow the on-screen instructions to nish adding the camera.
You can now power down the camera.
Weather resistant RJ45 cap assembly
Camera mounting overview
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/1080p_Mini-Bullet_Camera_(ADC-VC727P)/1080p_Mini-Bullet_C... 3/5
1080p Mini-Bullet Camera (ADC-VC727P) - Installation Guide - Knowledge Base
Advertisement
Table of Contents
Need help?
Do you have a question about the ADC-VC727P and is the answer not in the manual?