Alarm.Com ADC-VC725 Setup Manual

INTRODUCTION

The ADC-VC725 from Alarm.com is a high-performance
mini bullet camera optimized for indoor and outdoor video
monitoring. Its compact design and outstanding HD quality
video make the camera ideal for both commercial and
residential video installations. The camera features a dust-
resistant exterior casing with an IP66 rating and Power
over Ethernet (PoE) capabilities.

PRE-SETUP CHECKLIST

• ADC-VC725 camera (included)
• AC power adapter (required for non-PoE connections)
• Broadband (Cable, DSL or Fiber Optic)
• Internet connection with router
• A computer or mobile device with Internet access
• An Ethernet / Cat5 cable
• Login and Password for the Alarm.com account to which you will add the camera

ADD THE CAMERA TO AN ALARM.COM ACCOUNT

Complete these steps prior to installing the camera in its final location:
1. Connect the camera to the router via an Ethernet cable.
2. If the Ethernet connection does not provide power, connect the camera to an AC power adapter and plug
the adapter into a non-switched outlet.
3. Wait 2 minutes for the camera to connect to the Internet.
4. Add the device by either selecting the account in MobileTech OR by using a web browser and entering the
following URL: www.alarm.com/addcamera
5. Select the camera from the video list or type in its MAC address to begin adding the camera. The camera's
MAC address is located on the base of the camera.
6. Follow the on-screen instructions to finish adding the camera. You may configure camera settings from the
Customer Website.
You can now power down the camera and install it in its final location using the included hardware.
INDOOR/OUTDOOR MINI BULLET CAMERA
Indoor/Outdoor Mini Bullet Camera ADC-VC725
SETUP GUIDE
| Setup Guide