Table of Contents
Advertisement
E4402B Option H3B
Safety and Regulatory Information
Introduction
Review this product and related documentation to familiarize yourself with safety
markings and instructions before you operate the instrument. The documentation contains
information and warnings that must be followed by the user to ensure safe operation and
to maintain the product in a safe condition.
Before Applying Power
Verify that the product is configured to match the available main power source. If this
product is to be powered by autotransformer, make sure the common terminal is connected
to the neutral (grounded) side of the ac power supply.
Connector Care and Cleaning
If alcohol is used to clean the connectors, the power cord to the instrument must be
removed. All cleaning should take place in a well ventilated area. Allow adequate time for
the fumes to disperse and moist alcohol to evaporate prior to energizing the instrument.
WARNING
To prevent electrical shock, disconnect the Agilent Technologies
model product from mains before cleaning. Use a dry cloth or one
slightly dampened with water to clean the external case parts. Do
not attempt to clean internally.
Declaration of Conformity
For a copy of the manufacturer's Declaration of Conformity for this apparatus, contact your
local Agilent Technologies office or sales representative. Refer to
and Service Offices" on page
Statement of Compliance
This product has been designed and tested in accordance with the standards listed on the
Manufacturer's Declaration of Conformity, and has been supplied in a safe condition. The
documentation contains information and warnings that must be followed by the user to
ensure safe operation and to maintain the product in a safe condition.
Shipping Instructions
You must always call the Agilent Technologies Instrument Support Center to initiate
service before retuning your instrument to a service office. See
and Service Offices" on page
original packaging if possible. If not, comparable packaging must be used. Attach a
complete description of the failure symptoms.
User's and Service Guide
16.
16. Always transport or ship the instrument using the
Safety and Regulatory Information
"Contacting Agilent Sales
"Contacting Agilent Sales
11
Advertisement
Table of Contents
