Table of Contents
Advertisement
Power on and Run Router
4.1.4 Check after Power on
Power on the router. After loading all cards, check as follows to ensure that the later
configuration work can be done normally:
⚫
After the router is powered on, the ventilation system works, and check whether
there is the sound of the fan rotation and whether there is air discharged from the
ventilation holes of the router.
⚫
View whether the indicators on the router are normal.
Table 4-1 The indicator status when the router works normally
Indicator Name
SYS
PWR
FAN
4.2 Access Network
4.2.1 Access Network via Ethernet Twisted Pair
The 10/100/1000Base-T electrical interface of the router adopts the RJ-45 connector.
The port supports MDI/MDIX auto-sensing and adopts class-5 or above twisted-pair to
connect the network.
Connection steps:
Step 1: Insert one side of the Ethernet twisted pair to the Ethernet electrical interface of the
router (RJ-45 port).
Step 2: Insert the other side of the Ethernet twisted pair to the RJ-45 port of the device
4-8
Indicator Color
Description
Green
Quickly flash: indicates that the board is in
bootloader loading or IOS loading state (flash
frequency 5Hz)
on: the status before IOS loading and after
bootloader starts successfully
Slowly
(frequency 0.5Hz)
off: not powered on
Green
On: Indicate that the system power status is
normal
On: Indicates that the system fan status is
Green
normal
MP3900X Series Router Installation Manual
flash:
IOS
copyright©2020 Maipu, all rights reserved
loaded
successfully
Advertisement
Table of Contents
