Table of Contents
Advertisement
MP3900X Series Router Installation Manual
Step 2: Push in the power module until the buckle is fastened with the host chassis.
The diagram of inserting the power module:
3.6 Connect Power Cable
3.6.1 Installation Preparations
⚫
Considering the lightening protection requirement of the router, it is recommended
that the AC power reaches the better lightening protection effect via the external
lightening equipment when bringing in the router.
⚫
Before connecting the power cable, check and ensure that the power switch is
OFF.
3.6.2 Connect AC Power Cable
Step 1: Install the anti-stripping of the AC power cable to the installation hole of the power
module panel.
Step 2: Insert the output plug of the power cable into the input jack of the power module.
copyright©2020 Maipu, all rights reserved
Figure 3-20 Insert the power module
Figure 3-21 Install the anti-stripping
Router Installation
3-19
Advertisement
Table of Contents
