Maipu MP1800-10 User Manual
  1. Manuals
  2. Brands
  3. Maipu Manuals
  4. Wireless Router
  5. MP1800-10
  6. User manual

Maipu MP1800-10 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

MP1800-10 3G Router User Manual
V1.2
Maipu Communication Technology Co., Ltd
No. 16, Jiuxing Avenue
Hi-Tech Park
Chengdu, Sichuan Province
P. R. China
610041
Tel: (86) 28-85148850, 85148041
Fax: (86) 28-85148948, 85148139
URL: http://
www.maipu.com
Mail:
overseas@maipu.com
Maipu Confidential & Proprietary Information
Page 1 of 95

Advertisement

Table of Contents
loading

Related Manuals for Maipu MP1800-10

Summary of Contents for Maipu MP1800-10

  • Page 1 MP1800-10 3G Router User Manual V1.2 Maipu Communication Technology Co., Ltd No. 16, Jiuxing Avenue Hi-Tech Park Chengdu, Sichuan Province P. R. China 610041 Tel: (86) 28-85148850, 85148041 Fax: (86) 28-85148948, 85148139 URL: http:// www.maipu.com Mail: overseas@maipu.com Maipu Confidential & Proprietary Information...
  • Page 2 Maipu makes no representations or warranties with respect to this document contents and specifically disclaims any implied warranties of merchantability or fitness for any specific purpose. Further, Maipu reserves the right to revise this document and to make changes from time to time in its content without being obligated to notify any person of such revisions or changes.

  • Page 3: Table Of Contents

    MP1800-10 3G Router User Manual Contents Product Introduction ................5 Hardware Specifications ..................5 Functions ....................... 6 Product Models ....................... 7 Product Shapes ...................... 7 Online Login ....................9 Environment Requirement ..................9 Using Preparations ....................9 Configure Computer ....................10 Log into System ....................
  • Page 4 MP1800-10 3G Router User Manual Hot Backup ........................45 AAA Configuration ......................47 802.1x Authentication ......................48 PIN Code Management ....................... 50 Regular Online/Offline ......................55 Disconnection Detection ...................... 55 Multi-WAN Port Service ....................... 56 Status Firewall ...................... 59 Basic Setting ........................59 Access Control ........................

  • Page 5: Product Introduction

    MP1800-10 3G Router User Manual Product Introduction This chapter describes the specifications, functions, and product models of MP1800-10 router, letting you have a primary impression for MP1800-10 router and helping you to use the product better in the future. Hardware specifications Functions...

  • Page 6: Functions

    MP1800-10 3G Router User Manual Idle: 300mA@+12VDC  Max.: 800mA@+12VDC  5. Other parameters Demission: < 100mm×140mm×35mm (excluding antenna and  installation parts) Weight: < 1000g  Work environment temperature: -25 - +70 ℃  Storage temperature: -30 - +70 ℃...

  • Page 7: Product Models

    Support E3G management  Product Models MP1800-10 router adopts the general basic platform and individual application to adapt the different industry application requirements and network environment of the carrier. Currently, MP1800-10 series router has various models. To distinguish the product models, we describe as...
  • Page 8 MP1800-10 3G Router User Manual RM1800-10x: Front panel Back panel RESET: The reset button; press the button for 2-3s with power and the system resets; press the button for 6-10s and the device restores the factory setting. CONSOLE: Serial console platform; the baud rate is 9600, 8-bit data bit, no parity, one-bit stop bit.

  • Page 9: Online Login

    MP1800-10 3G Router User Manual Online Login This chapter describes the using requirement, installation wiring, and configuration login of MP1800-10 router, which can help you log into the management system of the product. Environment requirement Using preparations Configure computer Log into system...

  • Page 10: Configure Computer

    MP1800-10 3G Router User Manual  Caution The starting order of the device is: Insert SIM card > Insert antenna > Power on. If the starting order is wrong, maybe the functions of the device cannot be used normally. Configure Computer...
  • Page 11 MP1800-10 3G Router User Manual Configure local connection properties of the computer Select Internet Protocol (TCP/IP) and click Properties to enter the following figure: Maipu Confidential & Proprietary Information Page 11 of 95...
  • Page 12 Default gateway: 192.168.10.1 After configuration, click OK.  Caution The method interrupts the communication between the computer and LAN for a moment. The factory setting of MP1800-10 router LAN interface: IP address: 192.168.10.1  Subnet mask: 255.255.255.0  2. Method 2 Maipu Confidential &...
  • Page 13 Click Add (A) in “IP address (R)” of Figure 3-4, input the desired IP address, as shown in the following figure: Interface for adding TCP/IP address After configuration, click Add. In this way, one route to MP1800-10 router is added.  Note Maipu Confidential &...

  • Page 14: Log Into System

    MP1800-10 3G Router User Manual If you just configure MP1800-10 router, we recommend you to select Method 2, which can save time. Log into System Open and configure the IE browser of the computer and input http://192.168.10.1/ in the address bar.

  • Page 15: Configuration

    MP1800-10 3G Router User Manual Configuration This chapter describes how to configure MP1800-10 router via web, the functions, configuration parameters, precautions, and problems of the product. System Network Service Status firewall VPN configuration Status System The system of MP1800-10 router provides the following functions...

  • Page 16: System Time

    MP1800-10 3G Router User Manual Log out  System Time MP1800-10 provides three kinds of clock synchronizing modes, that is, manual setting, NTP network time and get time via 3G module. 1. Manual setting Enter System > System Time and you can see the interface for setting...
  • Page 17 Time Zone: Specify the time zone of the country against UTC  Caution NTP server is not sure to be the server on Internet, but should be the server that MP1800-10 router can access. 3. Setting via 3G module Get time via 3G module Maipu Confidential &...

  • Page 18: Remote Logs

    Log Source Interface: The source address of the remote log packet is the selected interface address. Management Control The management control function of MP1800-10 router can control whether to enable the SSH service, Telnet service or HTTP service. Enter System > Management Control and you can see the following configuration interface: Maipu Confidential &...

  • Page 19: Configuration Management

    MP1800-10 3G Router User Manual Management control configuration interface Configuration Management The configuration management function of MP1800-10 provides the backup and recovery for the user configuration. “Backup” can save the configured parameters to the PC; “Recovery” can restore the saved configuration parameters to the system.

  • Page 20: System Upgrade

    MP1800-10 3G Router User Manual When you need to restore the user configuration to the system, enter System > Configuration Management, click Browse to select the desired backup file, and then click Recover, as follows: Recover configuration 3. Recover factory configuration When you want to restore the system to the factory status, enter System >...

  • Page 21: Snmp

    MP1800-10 3G Router User Manual Upgrading process Click Run to start upgrading system. The upgrading is slow and you can view the upgrade process via the upgrade process bar. After upgrading successfully, the interface turns to the login interface automatically.

  • Page 22: Modify Password

    The above configurations are all set to the nodes in MIB. Modify Password MP1800-10 router provides the authority of modifying user password. Enter System > Modify Password and you can set the new password for the system administrator admin, as follows:...

  • Page 23: Log Out

    MP1800-10 3G Router User Manual Log Out When you want to log out the web configuration interface of MP1800-10 router, enter System > Log out. Network MP1800-10 router network setting includes the following functions: Dialing interface  WAN interface ...
  • Page 24 LNS and AAA server to cooperate. For the common user, after completing the above basic parameter configuration and saving, MP1800-10 router performs the wireless network dialing connection automatically after powering on every time. It is convenient to use.
  • Page 25 MP1800-10 3G Router User Manual After ticking “Enable standby account”, the basic setting interface of the dial interface is as follows: Basic setting of mobile network Main Account Recovery Time: After setting standby account dialing successfully, restore the dialing interval of the master account. The unit is minute;...
  • Page 26 MP1800-10 3G Router User Manual Online forever Always on line: Make the network connection be online forever. Dial on demand If the router Dial on demand: Trigger dial when there is service data flow. is configured with the service that needs to use the 3G traffic, such as NTP, remote log and IPSec DPD, the dial on demand function becomes invalid.
  • Page 27 MP1800-10 3G Router User Manual CHAP (Challenge-Handshake Authentication Protocol): It is one encrypted authentication mode and can avoid transmit the actual password of the user when setting up the connection. For PPP, the key information does not need to be transmitted in the channel during the authentication and the information switched during each authentication is different, which can avoid monitoring attack and improve the security.
  • Page 28 MP1800-10 3G Router User Manual Other parameters Other parameter setting provides you whether to permit using the peer DNS, LCP echo interval, LCP echo failure, packet side processing, and debug IP setting. Other parameters Asyn Control Character Map: The asyn control character mapping is one 32-bit set.

  • Page 29: Wan Interface

    1,500 bytes. The maximum packet transmitted on the PPP link can be set smaller. MRU: The maximum packet size received by MP1800-10 router. Local IP: Set the local IP of MP1800-10 router when performing PPP IPCP negotiation. Remote IP: Set the peer IP of MP1800-10 router when performing PPP IPCP negotiation.
  • Page 30 MP1800-10 3G Router User Manual P setting Static I IP address: Set the IP address of the WAN interface. It is mandatory. Netmask: Set the subnet mask of the WAN interface. It is mandatory. Gateway: Set the default gateway of the WAN interface.
  • Page 31 MP1800-10 3G Router User Manual PPPoE setting User name: Set the user name used when the WAN interface uses the PPPoE protocol to dial. Passsword: Set the password used when the WAN interface uses the PPPoE protocol to dial. When using the PPPoE protocol, you can configure other parameters by Network >...
  • Page 32 MP1800-10 3G Router User Manual Max Fail Count: Set the maximum dialing failure times. After reaching the maximum feature times, do not dial any more. The default value is 0 and it means always trying. It is mandatory. Forever online setting Dial on demand: Traffic triggers dialing.
  • Page 33 MP1800-10 3G Router User Manual MS-CHAP: Similar to CHAP, MS-CHAP is one encrypted authentication mechanism, using the MPPE-based data encryption. MS2-CHAP : MS-CHAP protocol version 2. EAP: It is one extended authentication protocol. The protocol is used for the authentication in the point-to-point network, such as PPP. It supports various authentication mechanisms.
  • Page 34 MP1800-10 3G Router User Manual Others Debug: Set whether to output the details of the LCP and IPCP negotiation during the PPP dialing. By default, it is disabled. Use Peer DNS: Whether to permit using the peer DNS. By default, it is enabled.

  • Page 35: Lan Interface

    Ethernet port. Enter Network > LAN interface and you can see the following configuration interface: LAN setting IP: Set or modify the LAN IP address of MP1800-10 router. The default value is 192.168.10.1. Usually, it is the gateway IP or LAN gateway of the direct-connected computer.

  • Page 36: Forwarding Mode

    MP1800-10 3G Router User Manual  Prompt If you do not need to modify the LAN IP of MP1800-10 router, you can jump over the LAN setting. If you modify the factory LAN IP of MP1800-10 router, you need to return to Chapter 3 to re-configure the computer and re-log into MP1800-10 router.

  • Page 37: Static Route

    MP1800-10 3G Router User Manual Dynamic domain name configuration interface Enable: If ticking the item, activate DDNS. Otherwise, disable DDNS. Service: Select DDNS service. Currently, just support 3322. Username: User name applied from the DDNS service provider. Password: The password applied from the DDNS service provider.

  • Page 38: Dynamic Route

    When the dial interface and Ethernet WAN interface are up, add the default route automatically. Do not need to add in the static route. Dynamic Route MP1800-10 router supports RIP dynamic route. Enter Network > Dynamic Route perform dynamic...
  • Page 39 MP1800-10 3G Router User Manual Dynamic route configuration interface Enable: Whether to enable the RIP service; Version: Select the RIP version, that is, RIPv1 and RIPv2. Receive V1’s packet: When selecting RIPv2, select whether to receive RIPv1 packets. Enable Source Check: Select whether to detect the source address of the point-to-point interface.

  • Page 40: Manual Online

    Before saving, do not switch to other interface. Manual Online MP1800-10 router already knows the IP address of the E3G server and the telephone number of the short message gateway. E3G server can manage the device via the traditional mode of delivering the configuration and also can let the E3G server to manage via the manual online.

  • Page 41: Wifi Setting

    MP1800-10 3G Router User Manual Notification Source Interface: The source interface used when the device sends the register, keepalive and alarm information to the E3G server. It can be LAN port or dial interface.  Cautions For the using of E3G management interface, usually select LAN port when using the IPSec tunnel, that is, let the E3G server manage the device via the tunnel;...

  • Page 42: Service

    WIFI Key: Sets the key (password) to access the WLAN AP Cipher: Select the encryption method for the transmitted payload. The options are: TKIP AES+TKIP mixed. Service The service functions of MP1800-10 router include: DHCP setting  Hot backup  Maipu Confidential & Proprietary Information...

  • Page 43: Dhcp Setting

    DHCP service can reduce the workload of the network management staff greatly. MP1800-10 router is inbuilt with DHCP server, letting it provide the dynamic IP distributing service for your LAN. Enter Service > DHCP Setting and you can see the following configuration interface: DHCP setting interface Enable DHCP service: If ticking the item, enable the DHCP service.
  • Page 44 MP1800-10 3G Router User Manual Lease Time: Set the keeping time of one IP address. The minimum value is 2 minutes; the unit is h or m or s.  Prompt When applying the DHCP service, it is required to enable the “Auto get IP address”...

  • Page 45: Hot Backup

    “Static IP mapping” also requires the client host to enable the “auto get IP address” function. Hot Backup “Hot backup” means that when MP1800-10 router halts, it can turn to the standby router directly, so as to continue the normal work. Enter Service > Hot backup and you can see the following configuration interface: Maipu Confidential &...
  • Page 46 MP1800-10 3G Router User Manual Hot backup configuration interface Enable: Whether to enable the VRRP function. State: Specify the state of this interface, MASTER or BACKUP Interface: Load balance work interface (it is LAN port). Synchronized Interface: The communication interface of the VRRP broadcast packets (usually, it is set as LAN port).

  • Page 47: Aaa Configuration

    (the settings between the master and standby routers (group) should be consistent). AAA Configuration The AAA module of MP1800-10 router provides the log authentication service, including serial port, web, Telnet, and SSH. Enter Service > AAA Configuration and you can see the following interface:...

  • Page 48: 802.1X Authentication

    MP1800-10 3G Router User Manual Radius Timeout: The time of waiting for the response of the Radius server; the unit is s. AAA server key configuration list Server Address: The address of the Radius server. Server Port: The port of the Radius server;...
  • Page 49 MP1800-10 3G Router User Manual 802.1x main configuration interface Base Configuration: The basic configuration of 802.1x, such as enable, protocol version, and access control mode. Authentication Server List: You can configure multiple authentication servers. When one authentication server fails, the time of switching to the next authentication server is 6s.

  • Page 50: Pin Code Management

    SIM card is delivered from the factory. One SIM card corresponds to one unique PUK code and cannot be modified. “PIN code management” means that MP1800-10 router manages the PIN code of the SIM card, including enabling or disabling PIN code protect and modifying the PIN code and PUK code un-blocking, so as to improve the security of the SIM card.
  • Page 51 MP1800-10 3G Router User Manual When using the management function of the PIN code, 3G dialer is disconnected automatically. Enter Service > PIN code management > PIN code protect and you can enable or disable the PIN code protect. The configuration interface of enabling the PIN code protect is as follows:...
  • Page 52 MP1800-10 3G Router User Manual Configuration interface of enabling PIN code protect The configuration interface of disabling the PIN code protect is as follows: Configuration interface of disabling PIN code protect Show status: Query the current status of the SIM card, including PIN code protect status, PIN code remaining input times, and remaining input times of PUK code.
  • Page 53 MP1800-10 3G Router User Manual Old PIN: It comprises 4-8 digitals. New PIN: It comprises 4-8 digitals. Confirm new PIN: It comprises 4-8 digitals. Click Show Status and the interface for modifying the PIN code is as follows: Interface for modifying the PIN code...
  • Page 54 MP1800-10 3G Router User Manual Show status: Query the current status of the SIM card, including PIN code protect status, PIN code remaining input times, and remaining input times of PUK code. PUK: It comprises 8 digitals. New PIN: It comprises 4-8 digitals.

  • Page 55: Regular Online/Offline

    PUK code unlock configuration interface Regular Online/Offline The regular online/offline module of MP1800-10 router is used to set the 3G online time and offline time of the system so that the 3G network is used only within the online time range, so as to save the traffic and improve the device security.

  • Page 56: Multi-Wan Port Service

    MP1800-10 3G Router User Manual The specific configuration mode: Enter Service > Disconnection detection, as follows: Disconnection detection Enable: If ticking, enable the disconnect detection function. Probe IP: The destination address of the ICMP detect packet. Interval: The interval of sending the ICMP packet.
  • Page 57 MP1800-10 3G Router User Manual Multi-WAN port interface status interface Multi-WAN port interface status interface Multiwan Interface Policy: Select multi-WAN work policy. There are two policies, that is, manual mode and backup mode. The manual mode means that when using dial interface and Ethernet WAN port separately, the user needs to configure the static route manually;...
  • Page 58 MP1800-10 3G Router User Manual Multi-WAN service interface configuration interface Interface: The name of the interface Enable interface: After ticking, enable the multi-WAN port service on the interface Role: The role of the interface in the multi-WAN port backup function. The metric value in the load balance.

  • Page 59: Status Firewall

    MAC-IP binding  Basic Setting Basic setting is the default action used to set the current MP1800-10 router firewall, including the default processing policy of the firewall, whether to filter Ping packets from Internet, whether to prevent DOS attack, and whether to enable the status firewall. Enter Status firewall >...

  • Page 60: Access Control

    The firewall security control is realized via the added security rule. To realize one IP filter control, you should add the corresponding control rule to the IP filter rule base of MP1800-10 router so that you can use MP1800- 10 to perform the security control protect. Enter Status Firewall >...

  • Page 61: Port Mapping

    All rules of the firewall comply with the principle “Configure later and match earlier”. Port Mapping With the NAT function of MP1800-10 router, you can perform the one-to- one mapping between Internet public IP address and internal private IP address. Enter Status firewall > Port mapping and you can see the...

  • Page 62: Mac-Ip Binding

    MP1800-10 3G Router User Manual After adding the port mapping information, you should click Save to make the device valid. Before saving, do not switch to the other interface. MAC-IP Binding The MAC-IP binding function is used to limit the host with the specified IP address in LAN to filter the packets according to the mode of matching IP and MAC at the same time.

  • Page 63: Qos

    Default Policy: The default processing mode of the firewall for the IP address not on the rule setting interface. The QoS of MP1800-10 router includes bandwidth management. Bandwidth Management Enter QoS > Bandwidth Management, tick Enable and you can set the...

  • Page 64: Vpn Configuration

     Caution When modifying the VPN tunnel configuration, the phase-1 ID cannot be modified. By default, the IPSec service of MP1800-10 router is disabled. To make all created rules take effect, you should enable the service when enabling one rule.
  • Page 65 MP1800-10 3G Router User Manual The IPSec tunnel configuration includes two phases: phase 1 and phase 2. 1. Add rule After inputting the tunnel name on the interface as shown in Figure 4-50, click Add to enter the interface for configuring the IPSec tunnel...
  • Page 66 MP1800-10 3G Router User Manual Enable: The switch of enabling the IPSec tunnel. By default, it is disabled. If ticking, it is enabled. NAT Traversal: To prevent the NAT gateway from affecting the IPSec tunnel, it is recommended to enable the NAT traverse (the tunnel data can traverse the NAT gateway).
  • Page 67 MP1800-10 3G Router User Manual Verify ID: If ticking the item, it is necessary to identify the peer ID. Encryption algorithm: The encryption algorithm used by IPSec phase-1. You can select DES, 3DES, blowfish, and aes. The default value is DES (for RM1800-10C, RM1800-10W, RM1800-10).
  • Page 68 MP1800-10 3G Router User Manual Remote Net: IPSec remote protect subnet, such as 192.168.20.0 (network number or single host, depending on the peer IPSEC tunnel configuration) Remote Mask: IPSec remote protect subnet mask, such 255.255.255.0, select 24; Tunnel Mode: You can select ESP protocol and AH protocol. Usually, we select ESP protocol.
  • Page 69 MP1800-10 3G Router User Manual Peer ID: The peer ID (it can be character string, IP address, domain name). Key Value: Used to fill in pre-share key. Click and you can delete the corresponding key.  Caution After adding the IPSec pre-share key configuration information, you should click Save to make the device take effect.
  • Page 70 MP1800-10 3G Router User Manual Click in the above created tunnel list, and you can enter the interface of configuring and editing the IPSec tunnel, as shown in Figure 4-51. For the parameter description, refer to the above section. 3. View tunnel status Enter Status >...

  • Page 71: Gre

    MP1800-10 3G Router User Manual GRE defines how to use one network protocol to encapsulate another network protocol. The GRE protocol has two usages: Enterprise internal protocol encapsulation and private address encapsulation. In China, nearly all enterprise networks adopt the TCP-IP protocol, so there is no market requirement for the enterprise internal protocol encapsulation when setting up the tunnel in China.
  • Page 72 MP1800-10 3G Router User Manual GRE connection configuration Enable GRE: The switch of enabling the GRE tunnel. By default, it is disabled. If ticking the item, enable the GRE tunnel. Outer IP Address: Set the external interface IP of the GRE tunnel peer network.

  • Page 73: Certificate Management

    MP1800-10 3G Router User Manual Edit GRE configuration To modify one configured tunnel, click at the corresponding rule. The interface for modifying the tunnel is as shown in Figure 4-62. 3. Delete rule When one GRE tunnel is not needed, click and you can delete the GRE tunnel.
  • Page 74 MP1800-10 3G Router User Manual Online certificate: Configure the related parameters to make the system get the CA certificate, device certificate, and crl file from the certificate server online. Currently, support the Windows certificate server and Maipu CMS certificate server.
  • Page 75 MP1800-10 3G Router User Manual 2. Certificate application To apply for the certificate, click VPN > Certificate management > Certificate application enter the IPSec certificate application configuration interface, as follows (two application modes): Certificate application Application Way: There are two modes of filling the certificate. One is to fill by the prompt;...
  • Page 76 MP1800-10 3G Router User Manual Organization Unit: (optional) input the locating unit. Common Name: (mandatory) You cannot input the special characters, such as # + = > < ; (it is unique). , ; ' / )( " Email: (optional) the email address of the company.
  • Page 77 MP1800-10 3G Router User Manual Online certificate CA Type: (mandatory) select the certificate server type. Currently, the system supports Maipu CMS and Windows certificate server. Select mpcms Maipu Confidential & Proprietary Information Page 77 of 95...

  • Page 78: Status

    MP1800-10 3G Router User Manual to indicate Maipu CMS server; select Windows to indicate Windows certificate server. Application Way: There are two modes of filling the certificate. One is to fill by the prompt; the other is to fill the whole subject name, applicable to apply for the certificates with multiple same attributes (such as CN=test,OU=mp1,OU=mp2,C=CN).

  • Page 79: System Logs

    System Information The system information mainly displays the hardware and software version information of MP1800-10 router so that you can select the corresponding upgrade file according to the version information when you update the system in the future.

  • Page 80: Ipsec Tunnel Status

    Click Status > System information and you can see the following interface: System information Device Model: MP1800-10 product model information, such as RM1800- 10C. Device Serial Number: The device factory serial number information. Hardware version: The current hardware version information.

  • Page 81: Dialer Interface Status

    The dialer interface status displays the used wireless network module connection information, network connection information, and whether SIM card is in place of MP1800-10 router. With the information, you can get to know the wireless network connection status of the current device, as follows: Maipu Confidential &...
  • Page 82 MP1800-10 3G Router User Manual Dialer interface status After enabling the standby account, the dial interface status interface is as follows: Maipu Confidential & Proprietary Information Page 82 of 95...
  • Page 83 MP1800-10 3G Router User Manual Dial interface status The dialer interface traffic information displays the wireless network interface traffic information of the current device, as follows: Dialer interface traffic information The mobile network device information displays the wireless network device information of the current device, as follows: Maipu Confidential &...

  • Page 84: Wan Status

    MP1800-10 3G Router User Manual Mobile network device information WAN Status The WAN status displays the current WAN interface connection mode, connection status and the receiving and forwarding traffic of the WAN interface. Enter Status > WAN status and you can see the following interface:...

  • Page 85: Lan Status

    MP1800-10 3G Router User Manual WAN traffic information Received packets: Display the total number of the packets received by the WAN port Received Errors: Display the number of the error packets received by the WAN port Received Drops: Display the number of the dropped packets received by...

  • Page 86: Route Information

    Sent Bytes: Display the number of the bytes sent by the LAN port. Route Information View all route information of MP1800-10 router. Click Status > Route information to view all route information of the system, as follows: Maipu Confidential & Proprietary Information...

  • Page 87: Dhcp Information

    Route information DHCP Information The DHCP client information list displays the IP distribution information of all DHCP clients of MP1800-10 router. Click Status > DHCP information and you can see the auto distributed addresses, as follows: DHCP information Connection Information The connection information displays all ARP table information of MP1800- 10 router and the connection information of the current system.

  • Page 88: Gps Status

    MP1800-10 3G Router User Manual Connection information GPS Status This screen provides the longitude and latitude information of the devices location if GPS signal can be received: GPS Status Maipu Confidential & Proprietary Information Page 88 of 95...

  • Page 89: Cli

    MP1800-10 3G Router User Manual After logging in via the CLI of the device (serial port, Telnet, SSH), you can use the command to perform the basic viewing and configuration operations, including: System  Interface   IPSec  Route ...

  • Page 90: Interface

    MP1800-10 3G Router User Manual  login Log into the shell command line login key Syntax Description Key is the login value after calculation Interface Command Description Configuration Mode show interface View the interface information of the system show interface...

  • Page 91: Ipsec

    MP1800-10 3G Router User Manual Send content to phone-num Syntax Description phone-num content phone-num refers to the destination number; content refers to the content of the short message. Note: Before the telephone number, there needs to be county code sometimes, such as China +86. Here, the whole phone-num should be as follows: +8613912345678.

  • Page 92: Route

    MP1800-10 3G Router User Manual type  show crypto ca View the certificate information in the system Syntax Description crls View the ca certificate certificates View the device certificate  show crypto View the ike or ipsec sa information show crypto {ike | ipsec} sa...

  • Page 93: Firewall

    MP1800-10 3G Router User Manual Syntax Description netaddr The destination network address, such as 192.168.10.0. mask The network mask, such as 255.255.255.0 gateway The next-hop IP address Firewall Command Description Configuration Mode show firewall {configure | View the firewall name...

  • Page 94: Appendix

    MP1800-10 3G Router User Manual Appendix Access Point Name CDMA Code Division Multiple Access DHCP Dynamic Host Configuration Protocol Domain Name System GPRS General Packet Radio Service Global System for Mobile Communications Internet Protocol IPv4 IP version 4 IPv6 IP version 6...
  • Page 95 MP1800-10 3G Router User Manual TDMA Time Division Multiple Access User Datagram Protocol User Identity Module UMTS Universal Mobile Telecommunication System Virtual Private Network VRRP Virtual Router Redundancy Protocol Wide Area Network Wireless Application Protocol Maipu Confidential & Proprietary Information...

Table of Contents