Power on and Run Router
Step 8:
Display the following test-HyperTerminal interface, press Enter at the blank place, and
the serial port displays the print information. The setting of the HyperTerminal is
complete.
4.1.3 Power on and Start
Check before Power on
Check the router before powering on:
⚫
The interface cables, power cables, and PEs are connected correctly.
⚫
Power supply voltage meets the power requirement of the device. For details, refer
4-6
Figure 4-9 "Test properties" interface
Figure 4-10 test-Hyperterminal interface after setting
MP3900X Series Router Installation Manual
copyright©2020 Maipu, all rights reserved