Laser Safety; Installation Tools - Maipu MP3900X Series Installation Manual

MP3900X Series Router Installation Manual
alligator clip of the anti-static wrist to the grounding terminal of the chassis.
Step 4: Ensure that the anti-static wrist is well-grounded. The using method of the anti-static
wrist is shown in the following figure.

2.2.4 Laser Safety

⚫
For the MP3900X series router with the optical interface, avoid directly viewing the
laser beam from the optical module inside. Viewing the laser beam from the optical
module inside directly may damage your eyes.
2.3 Installation Tools, Instruments, and Equipment
Needed tools:
⚫
Phillips srewdriver
⚫
Slotted screwdriver
⚫
Anti-static wrist
⚫
Paper knife
Cables:
⚫
PGND cable and power cable
⚫
Console cable
copyright©2020 Maipu, all rights reserved
Figure 2-1 Using method of anti-static wrist
Installation Preparations
2-3