Generac Power Systems PWRgenerator 9 kW Installation Manuallines page 44

Troubleshooting
Problem Cause
Excessive engine oil.
Faulty engine breather.
Unit consumes
large amounts of Incorrect type or viscosity of oil.
oil
Damaged gasket, seal, or hose.
Restricted air filter.
PWRcell battery limitations.
Power converter
PLM communication error.
faults
Disconnected breakers.
* Contact an IASD or visit
42
www.generac.com for assistance.
Correction
Adjust oil to correct level.
Contact an IASD for assistance.
See Engine Oil Requirements in owner's
manual.
Inspect for oil leaks.
Replace air filter.
Contact an IASD for assistance.
Installation Guidelines for PWRgenerator Air-Cooled Generators