Generac Power Systems PWRgenerator 9 kW Installation Manuallines page 2

Air-cooled generator
Hide thumbs Also See for PWRgenerator 9 kW:
Table of Contents

Advertisement

Use this page to record important information about this generator.
Model:
Serial:
Prod Date Week:
Volts:
400VDC
Amps:
22.5A
Engine Speed:
2,300 rpm
Controller P/N:
ii
Record the information found on the unit data label on this
page. For the location of the unit data label, see the owner's
manual. The unit has a label plate affixed to the inside parti-
tion, to the left of the control panel console.
Always supply the complete model and serial numbers of the
unit when contacting an Independent Authorized Service
Dealer (IASD) about parts and service.
Operation and Maintenance: Correct maintenance and
care of the generator ensures a minimum number of prob-
lems and keeps operating expenses at a minimum. It is the
operator's responsibility to perform all safety inspections, to
verify all maintenance for safe operation is performed
promptly, and to have the equipment inspected periodically
by an IASD. Normal maintenance, service, and replacement
of parts are the responsibility of the owner/operator and are
not considered defects in materials or workmanship within
the terms of the warranty. Individual operating habits and
usage may contribute to the need for additional maintenance
or service.
When the generator requires servicing or repairs, Generac
recommends contacting an IASD for assistance. Authorized
service technicians are factory-trained and are capable of
handling all service needs. To locate the nearest IASD,
please visit the dealer locator at:
www.generac.com/Dealer-Locator.
WARNING
CANCER AND REPRODUCTIVE HARM
www.P65Warnings.ca.gov.
Installation Guidelines for PWRgenerator Air-Cooled Generators
(000393a)

Advertisement

Table of Contents
loading

Table of Contents