E-Fly Wireless Dmx Set Up - Elation PROTEUS HYBRID User Manual

E - F L Y W I R E L E S S D M X S E T U P
BEFORE SETTING THE WIRELESS CHANNEL ON ANY E-FLY FIXTURE,
MAKE SURE THE SOURCE E-FLY WIRELESS DMX TRANSCEIVER DEVICE
IS OFF. TO CONTROL FIXTURE WITH E-FLY WIRELESS DMX SIGNAL
1. Ensure the source E-FLY wireless DMX Transceiver device is powered OFF.
2. Power ON fixture and from the LCD control panel select DMX & E-FLY or E-FLY & OUT in the Select Signal sub menu
of the PERSONALITY main system menu.
3. From the LCD control panel set the E-FLY wireless channel to the same wireless channel of the source E-FLY DMX
Transceiver device in the Set E-FLY Chn sub menu of the PERSONALITY main system menu.
NOTE: Erratic fixture movement may occur if other E-FLY wireless DMX products are in use in the same
area and are using the same E-FLY wireless channel. The fixture may immediately start to respond to the
DMX wireless signal from another E-FLY wireless DMX Transceiver immediately when E-FLY is enabled.
Make sure to know what E-FLY wireless channels are being used in the area where the fixture is being
installed.
ELATION E-FLY WIRELESS TRANSCEIVER only has 0-14 wireless channels, NO CH 15.
4. Set fixture DMX address in the Set Dmx Address sub menu of the FUNCTION main system menu.
5. The E-FLY signal Indicator on the fixture LCD control display will illuminate
connection has been made or illuminate
above.
6. Repeat this process for all E-FLY compatible fixtures in the E-FLY wireless network, making sure all fixtures are
assigned the same E-FLY wireless channel.
7. After all fixtures in the E-FLY wireless network have been set to the same E-FLY wireless channel and powered
ON, now power ON the source E-FLY DMX Transceiver device.
8. Test all fixtures connected to the E-FLY wireless network to confirm proper functionality.
RED
for NO connection. If no connection is made, repeat steps 1-4
39
GREEN
if a successful wireless DMX