Elation PROTEUS HYBRID User Manual page 23

G O B O I N S T A L L A T I O N
12. Carefully remove retaining spring.
13. Carefully separate the GOBO disc from the GOBO Holder.
14. Carefully remove the retaining ring washer attached to the GOBO.
SAVE RETAINING RING WASHER FOR USE WITH THE NEW REPLACEMENT GOBO!
RETAINING RING MUST BE USED IN ORDER TO PREVENT GOBO BURNING!
15. Carefully replace the GOBO and GOBO Holder following the instruction steps in reverse order.
NOTE: Brush away any debris using a nonabrasive brush before installing the effect module.
CAUTION! DO NOT SCRATCH GOBO OR GOBO HOLDER!
23