Elation PROTEUS HYBRID User Manual page 25

G O B O I N S T A L L A T I O N
T O R Q U E S E T T I N G S
PANEL SCREWS MUST BE TIGHTENED WITH A TORQUE WRENCH.
The (12x) hex-head screws holding the panels MUST be tightened with a torque wrench.
(not included)
* lbf-in = Pound Force Inches | kgf-cm = Kilogram Force Centimeters
CAUTION! DO NOT OVER TORQUE SCREWS AS THIS CAN CAUSE LEAKAGE ISSUES!
TO CONFIRM THE IP65 INTEGRITY AFTER A GOBO REPLACEMENT, TEST FIXTURE USING
THE ELATION IP TESTER. CONTACT ELATION SERVICE FOR MORE DETAILS.
F O R
TORQUE SETTING =
S C R E W S
11 lbf-in. (12.7kgf-cm) *
25