Advertisement
Available languages
Available languages
Note:
Be sure to install the handle so that the orientation of the number pad and the "LOCK" button is
correct. The physical keyhole should face down, and the "LOCK" button should face up.
11.
Strike installation
Screws
12.
Functionality test
A. Keep the door half open when testing.
B. Check for proper operation of the following:
• When the lock is in the locked state, turn the front knob, and the latch should remain still.
• In the unlocked state, turn the front knob, and the latch should retract.
• In the locked and unlocked state, turn the rear knob, and the latch should retract.
C. Verify that other functions, such as automatic locking, password camouflage, "Reset" button, and
remote unlocking by request through the app are operating correctly. All of these functions are described
later in this manual.
Plastic box
for latch
Metal plate
Wall
29
Advertisement
