Advertisement
Available languages
Available languages
1.
Usage considerations
Note:
Have at hand a Phillips screwdriver and 4 "AA" batteries before installation.
1
In the factory settings, you will be able to release the lock by entering the password "123456" fo-
llowed by the "#" key or with the physical key.
The lock has 4-opening methods: fingerprint, numeric passwords, with a physical key, and from the
2
app by request typing "*", 6, "#" on the lock.
When the battery voltage is less than 4.8 Vdc, a low battery notification will appear, in which case,
3
replace the batteries as soon as possible. When the batteries run out of power, you can connect an
external power supply using the emergency Micro USB port. You can use a Power Bank with 5 Vdc
output (not included) or a 5 Vdc 2 A AC/DC adapter (not included).
4
Do not use corrosive material to clean the surface.
5
In cases where you cannot release the lock by numeric password, fingerprint, or from the app, use
the physical key to do so. Always keep the key with you or put it in a safe place.
6
If the lock is unused for a long time, the unlocking could take 3 seconds or more.
7
The lock is suitable for doors with a thickness of 1.37 in (3.5 cm) to 3.14 in (8 cm).
8
Operating temperature 14° F ~140° F (-10° C ~ 60° C).
2.
Contents
• Front handle (1)
• Rear handle (1)
• Metal plate for the latch (1)
• Metal plate screws (2)
• Plastic box for the latch (1)
• Connecting columns (2)
• Springs (2)
• Shortening screws for the connecting columns
that are adjustable to the door thickness (2)
• Physical keys (2)
• Lock body (1)
• Screws to fix the lock body (2)
• Steel spindle (2)
• Template with hole dimensions (1)
• Reset button key (1)
• Quick guide
23
Advertisement
