Lloyd's LC-1342 Quick Installation Manual page 28

D. Insert the lock body into the door and secure
with two screws.
10. Lock installation
1. Front handle installation:
A. Pass the connecting cable through the hole in
the steel spindle.
B. Pass the steel spindle and connecting columns
through the holes in the lock body, press
the front handle towards the door.
C. Choose one of the two springs depending on
the thickness of the door and insert the connec-
ting cable into it.
Note:
Ensure you have tidied up the excess cable so that the battery cover fits correctly
into the rear handle.
2. Rear handle installation:
A. Pass the connecting cable through the hole in the steel spindle to the rear handle.
B. Align the steel spindle and connecting screws with the holes in the lock body.
C. Secure the rear handle and front handle with the shortening screws for the connecting columns. Turn
the knobs and make sure they operate normally.
D. Plug the connecting cable into its interface.
E. Tidy up the excess cable inside the battery compartment.
F. Insert 4 AA batteries.
G. Place the compartment cover and secure with the 2 screws.
28
Connecting
cable
Spring
Connecting
columns
Steel spindle