Related Manuals for Elmo L-12G
Summary of Contents for Elmo L-12G
- Page 1 L-12G / TT-12G VISUAL PRESENTER INSTRUCTION MANUAL Please read this instruction manual carefully before using this product and keep it for future reference.
-
Page 2: Important Safeguards
IMPORTANT SAFEGUARDS ■ Read Instructions All the safety and operating instructions should be read before the appliance is operated. ■ Retain Instructions The safety and operating instructions should be retained for future reference. ■ Heed Warnings All warnings on the product and in the operating instructions should be adhered to. ■... - Page 3 ■ A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn. ■ Object and Liquid Entry Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock.
- Page 4 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”...
- Page 5 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC Certification or Declaration of this device and may cause interference levels which exceed the limits established by the FCC for this equipment. It is the responsibility of the user to obtain and use a shielded equipment interface cable with this device.
-
Page 6: Before You Use
BEFORE YOU USE When using this device, be sure to use the supplied power cord and AC adapter. The power cord and AC adapter that come with this product are for this product only. Do not use them with another product. - Page 7 • Do not expose the battery to excessively high temperature or low pressure at high altitude while using, storing or carrying the battery.It may cause an explosion or the leakage of flammable liquid or gas • Do not dispose of the battery in a fire or in a heated furnace. An explosion may occur. •...
-
Page 8: Table Of Contents
CONTENTS ........................2 IMPORTANT SAFEGUARDS BEFORE YOU USE ............................6 CONTENTS ..........................8 1. BUNDLED ITEMS ......................... 10 2. BASIC OPERATIONS ........................11 2-1 Document camera ..........................11 Part names ............................11 Operating panel ............................ 12 Rear panel and cable connection ......................13 Side panel ............................ - Page 9 3. ADVANCED OPERATIONS......................46 3-1 Using an SD card / USB flash drive ....................46 Recording ............................. 47 Still image ............................ 47 Video ............................48 Displaying the stored data ........................49 Thumbnail display (list of still images / videos) ................ 49 Displaying a still image full-screen ....................
-
Page 10: Bundled Items
BUNDLED ITEMS The items below are included with this product. If any item is missing, contact the dealer from whom you purchased this product. AC adapter AC cord Document camera USB Type C-A cable Remote control Fixture × 2 Coin battery Cable tie x2 （For HDMI c a b l e ）... -
Page 11: Basic Operations
BASIC OPERATIONS ■Part names P.12 For operations of the main unit, refer to ① ④ ⑤ ② ③ ⑨ ⑥ ⑧ ⑦ Name ① LED lighting switch P.26 ② LED lighting P.26 ③ Built-in microphone P.15 ④ Zoom dial P.24 ⑤... -
Page 12: Operating Panel
② ◼ Power LED Operating panel ① ④ Microphone LED ③ ⑤ ⑦ Miracast LED ➅ ⑧ ⑪ ⑨ ⑫ ⑩ ⑬ ⑭ Mark Function To turn on / off the power ① Power ON: Power LED lights up blue Power OFF (standby status): Power LED lights up red P.59 ②... -
Page 13: Rear Panel And Cable Connection
■Rear panel and cable connection ① ② ③ ④ ⑤ ⑥ Mark Function To connect the AC adapter. (AC cord is supplied with the product.) ① To output digital images. (HDMI cable is not supplied with the product.)［TYPE-A］ ② To input digital images. (HDMI cable is not supplied with the product.)［TYPE-A］ ③... - Page 14 ④ Connecting to a device with an analog RGB input port Connect a commercially available RGB cable to the [ ] port on the rear panel. ⑤ Connecting to a device with an analog RGB output port Connect a commercially available RGB cable to the [ ] port on the rear panel.
-
Page 15: Side Panel
■Side panel ① ② ③ ④ ⑤ Mark Function To connect a USB flash drive (commercially available) or ① mouse. To output audio. (Audio cable is not supplied with the product.) ② To connect a microphone. (Microphone is not supplied with this product.) ③... -
Page 16: Moving Parts Of The Document Camera
■Moving parts of the document camera The product can be moved as shown below. -
Page 17: Output Image Size
■Output image size The output image differs depending on the resolution and output mode. The following table shows the relation between viewing angle, resolution and output mode. Note that there are shooting conditions. RGB output / HDMI output ・When HDMI connection is available, the same resolution image as the HDMI output is output simultaneously from the RGB output. - Page 18 Resolution / Frame rate（when outputting images to a computer via USB） ・The following table shows the relation between output resolution and frame rate when outputting images to a computer via USB. ・If the computer used has low specifications, the frame rate may be less than that shown in the table.
-
Page 19: Supplied Accessories
2 Supplied accessories ■Remote control Preparation of the remote control Remove the battery case by pressing the release lock inward. Insert the coin battery into the battery case, so you see the positive (+) side facing up. Then insert the battery case into the remote control. Note Use a commercially available CR2025 coin battery for the remote control... -
Page 20: Fixture
■Fixture How to use the supplied fixture and cable tie You can fix the HDMI cable to the HDMI port by using the supplied fixture and cable tie. Items to use (supplied) Fixture x2 Cable tie x 2 (For HDMI cable) ①Before connecting the HDMI cable to the HDMI port, remove the screw above the HDMI port. - Page 21 When the plug does not have a concave part, wrap the cable tie as shown below. Concave part with concave part without concave part ①Wrap the cable tie around the root of the cable and pull it tight. Fixture Cable tie HDMI cable ②...
-
Page 22: Shooting Images
3 Shooting images ON/OFF switch for illumination Power cord Camera AC adapter Cable connection ■Setting up the product Set up the product as shown in the figure above. Then connect the product to a projector or a monitor. ■Connecting the power cord Connect the power cord and the AC adapter. -
Page 23: Turn On / Off The Power
■Connecting the video cable Connect the product to a display device using the cable corresponding to the specification of the display device. P.22 Caution Before connecting the product to other devices, be sure to turn off the power for all of the devices. -
Page 24: Adjusting The Size
■ Adjusting the size The display range of the document can be adjusted by rotating the zoom dial on the product or by pressing the [ ] buttons on the remote control. ：The object is shown in large size. ZOOM-IN ：The object is shown in small size. -
Page 25: Adjusting The Brightness
■ Adjusting the brightness Use the [ ] buttons on the Operating panel or the remote control to change the level of brightness of the displayed image. The brightness of the image can be changed. Note • To reset the brightness setting to factory default, press the [ ] buttons on the Operating panel at the same time. -
Page 26: Turning On / Off Led Lighting
■ Turning on / off the LED lighting LED lighting The LED lighting can be turned on or off by sliding the LED lighting switch. [ON] : The LED lighting turns on. [OFF] : The LED lighting turns off. Caution •... -
Page 27: Selecting The Image Source
■Selecting the image source You can select the image source as described below ① Camera image： ] button on the Operating panel or ] button on the remote control. ② Image being input to the [ ] ports： ] button on the Operating panel or ] button on the remote control. -
Page 28: Rotating The Image
■Rotating the image Press the [ ] button on the Operating panel to rotate the camera image. The rotation angle can be selected between 90° and 180° in the “Image rotation” in the System Setting menu. ■Turning on / off the audio Press the [ ] button on the Operating panel or remote control to turn on/off the audio when outputting the camera image to a computer (via USB), or when recording video. -
Page 29: Configuring The Setting
4 Configuring the settings Each setting of the product can be configured from the menu (texts or icons) displayed on the screen. ■How to configure the settings ① Press the [ ] button on the Operating panel or the remote control to display the menu on the screen. - Page 30 ② Comparison of menus Split ZOOM Brightness AF / Freeze Highlight Mask PinP Settings screen slider slider Freeze 〇 〇 Settings (Default setting) 〇 〇 〇 〇 〇 〇 Full menu 1（no mouse） 〇 〇 〇 〇 〇 〇 〇 〇...
-
Page 31: System Setting Menu(1/4 Page)
■System Setting menu （1/4 page ) Factory Icon Name Selection item Function setting To configure system settings and レ Settings camera quality settings. Menu item To display support functions such Full menu as Highlight and Mask. Horizontal To invert the screen horizontally. reverse Microscope To be used to display a microscopic... - Page 32 Factory Icon Name Selection item Function setting レ Auto HD(1280ｘ720) To set the resolution of the output Resolution image.※1 UHD(3840ｘ2160) FHD(1920ｘ1080) レ Normal (16:9)/1080P To set the viewing angle of the Viewing angle output image.※2 Full (4:3)/XGA レ Built-in mic To switch the audio source.
-
Page 33: System Setting Menu(2/4 Page)
(2/4 page ) Factory Icon Name Selection item Function setting ▲ To set the HDMI sound volume and レ Sound volume the external microphone volume. ▼ To output the camera image from レ Camera only USB. USB camera mode To output the camera image or Camera＆HDMI HDMI input image from USB. - Page 34 Factory Icon Name Selection item Function setting 1 min 10 min The camera acquires still images 30 min one at a time at set time intervals Time-lapse and plays back the 30 images as a interval レ 1 hr 1-second video by joining them together.
-
Page 35: System Setting Menu(3/4 Page)
(3/4 page) Factory Icon Name Selection item Function setting 90° Rotate angle To set the angle of the image rotation. レ 180° レ When this setting is set to ON, the Auto wake up product automatically starts up after the AC power is supplied. - Page 36 Factory Icon Name Selection item Function setting Normal Suitable for displaying documents. Suitable for displaying black and Black&White white images. Image mode Suitable for projecting images with DLP projector a projector. Suitable for displaying colorful レ Color emphasis objects. ▲ To adjust the level of edge レ...
-
Page 37: System Setting Menu(4/4 Page)
（4/4 page) Factory Icon Name Selection item Function setting レ To set the R1 mode. The product enters the most suitable mode for displaying on our R1 mode electronic whiteboards (EL55R1, EL65R1, EL75R1, EL86R1) via USB. To reset to factory defaults. Reset Select YES to reset all settings to factory defaults. -
Page 38: Full Menu1
■Full menu 1 This menu appears when no mouse is connected. Icon Name Function Compare Picture To move to the Split-screen selection mode to select the （Split-screen） content to be compared. PinP To move to the Picture-in-Picture mode. Settings To display the Settings menu. ■Compare Picture function ①Feature You can display the live camera image, HDMI input image and still images stored in SD... - Page 39 Pressing the MENU button [ ] while the split-screen is displayed toggles between showing and hiding the menu. Selecting the Camera mode button [ ] on the Operating panel or the Camera icon ] in the menu cancels the Compare Picture function and the camera image is displayed.
- Page 40 Icon Name Function Prev Page To move to the previous thumbnail page. Next Page To move to the next thumbnail page. To display thumbnails. To display the camera image. To display thumbnails of the images stored in the internal Internal memory memory.
-
Page 41: Pinp Function
■PinP function ①Feature You can display the HDMI input image and still images stored in SD card, USB flash drive or internal memory on a small screen in the lower right corner of the screen while displaying the live camera image. ※For the HDMI input image, only 1080p images can be displayed. - Page 42 Switching between small screen and large screen Pressing the [ ] button on the Operating panel or the remote control during operation of the PinP function toggles between small screen and large screen. Note ・The PinP images cannot be saved. ・The PinP function cannot be used (no image is displayed) during USB streaming or Miracasting.
-
Page 43: Full Menu2
■Full menu 2 This menu appears when a mouse is connected. When a mouse is connected, the menu can be operated with the mouse. When a mouse is connected while the "Full menu" is displayed, the Freeze icon, Highlight icon, and Mask icon are added and can be operated with the mouse. ※When a mouse is connected and the cursor is displayed, only the camera image is slightly darkened. -
Page 44: Highlight Function
■Highlight function ①Feature You can enhance the contrast for the specific area of the image to draw attention of the audience. ②Operations When the [ ] icon at the bottom left of the Menu screen is selected while the camera image is displayed, the Highlight function works. -
Page 45: Mask Function
■Mask function ①Feature This is a function to hide a part of the image. ②Operations With the camera image displayed, press the MENU button [ ] on the remote control or the Operating panel to display the Menu screen. Select the Mask icon [ ] on the Menu screen to add a mask effect to the screen The mouse cursor can be used to move and zoom in and out of the masked area. -
Page 46: Advanced Operations
ADVANCED OPERATIONS With the product, you can record the camera image as a still image or video to an SD card, USB flash drive, or internal memory. The image data recorded in an SD card, USB flash drive, or internal memory can be displayed on the monitor. -
Page 47: Recording
Note Formatting an SD card/USB flash drive When you need to format an SD card/USB flash drive, insert it into the product and execute formatting. ① Press the [ ] button on the Operating panel to display the menu. ② Select “Format SD” or “Format USB” from the “System Setting” menu. ③... -
Page 48: Video
Video Basic operations ① Press the [ ] button on the Operating panel or the [ ] button on the remote control. ②Make sure that the menu is not displayed on the screen and press the [ ] button on the Operating panel or the [ ] button on the remote control. -
Page 49: Displaying The Stored Data
■ Displaying the stored data Thumbnail display (list of still images/videos) Basic operations ① Press the [ ] button on the Operating panel or the [ button on the remote control to display thumbnails of still images and videos. ②Changing thumbnails of still images and videos, changing the storage location From the Thumbnail screen, select the storage location (Internal memory [ ] / SD card ] / USB flash drive [... - Page 50 ■Descriptions of each menu Thumbnail display menu Icon Name Function Prev Page To move to the previous thumbnail page. Next Page To move to the next thumbnail page. Prev Menu To display the previous menu page. To display thumbnails of the images stored in the internal memory. Internal memory To display thumbnails of the images stored in the SD card.
-
Page 51: Displaying A Still Image Full-Screen
■Displaying a still image full-screen You can display a still image you selected from the thumbnails full-screen. Basic operations ①Display thumbnails of still images in the Thumbnail screen. Select the storage location (Internal memory [ ] / SD card [ ] / USB flash drive [ When “Still image [ ]”... - Page 52 ③Confirm the still image you want to display full-screen. Press the [ ] button on the Operating panel or the [ ] button on the remote control to display the selected still image full-screen. Thumbnails Full-screen image Press the [ ] button or [ ] button on the Operating panel or [ ] button or [...
-
Page 53: Playing A Video Full-Screen
■Playing a video full-screen You can play a video you selected from the thumbnails full-screen. ＜サムネイル画像＞ ＜動画の全体表示＞ Basic operations ①Display thumbnails of videos in the Thumbnail screen. Select the storage location (Internal memory [ ] / SD card [ ] / USB flash drive When “Video [ ]”... - Page 54 ③Confirm the video you want to play full-screen. Press the [ ] button on the Operating panel or the [ ] button on the remote control to automatically play the selected video full-screen. Thumbnails Full-screen image (video playback) Press the [ ] button or [ ] button on the Operating panel or [ ] button or [...
- Page 55 ■Operations of video playback menu Basic operations If you want to hide the menu, press the MENU [ ] button on the remote control or the Operating panel while the video is displayed full-screen. Move the cursor using the [ ] button on the Operating panel or the [ ] button on the remote control.
-
Page 56: Using By Connecting To A Computer With The Usb Cable
3-2 Using by connecting to a computer with the USB cable This product is compliant with UVC and UAC and troublesome installing of a driver is not required. You can use the product with a video conference system or other various application software by simply connecting the USB cable to the USB port of a computer. -
Page 57: Switching To The External Input Mode(External Input Screen)
③Camera&HDMI The external HDMI input signal is converted to USB signal. To switch between the L-12G camera image and external HDMI input image during the USB image output, use the Camera mode button [ ] and the External input mode button ④About the output image at each setting (Mode button/USB camera mode) - Page 58 Note Notes on Camera&HDMI settings The resolution of the external HDMI input image must be 1080P (1920x1080). Other resolutions cannot be converted properly and will result in an error message as shown below. In the external HDMI input mode, only image will be output. No audio will be output. When connecting to a computer, the image resolution is automatically set to 1080P by the 各設定（モード切換ボタン/USBカメラモード）時の出画について...
-
Page 59: Using Miracast Function
3-3 Using Miracast function The camera image of L-12G camera can be mirrored to the ElmoCast or HS-2 wirelessly. If the "Miracast auto connect" setting was set to ON the last time the power was turned OFF, the L-12G will automatically connect to a destination device for Miracasting at startup. - Page 60 ⑤Select the device to be connected with the up/down keys and press the Enter key. The ElmoCast starts to display images. ※If you want the L-12G to automatically connect to a device via Miracast at startup, set the "Miracast auto connect" setting to ON.
-
Page 61: Displaying Enlarged Image Using A Microscope On
4 Displaying enlarged images using a microscope By attaching the separately sold microscope attachment lens to a microscope, you can display the enlarged image through the document camera lens. ㄪ ㄪ Microscope attachment lens (sold separately) CODE：1332 Microscope mode operations When the Microscope mode in the System Setting menu displayed by pressing the MENU button [ on the remote control or the Operating panel is... -
Page 62: Procedure
■Procedure ① Change the setting of the product for using a microscope. Display the System Setting menu by pressing the MENU button [ on the remote control or the Operating panel while the camera image is displayed. Then select the Microscope mode. ②... - Page 63 ⑥ Adjust the brightness. Adjust the brightness with the mirror or the light on the microscope. ⑦ Adjust the display range. Adjust the display range. ⑧ Adjust the focus. ⑨ Exit the Microscope mode. Select the [ ] icon displayed at the bottom left of the screen by pressing the MENU button [ ] or press the Camera mode button [ ] on the remote control or the...
-
Page 64: Firmware Update Procedure
Lens initialization ② Insert the SD card to the L-12G. LED flashes red. Connect the AC adapter to the L-12G. Wait until the product is in standby mode. (The POWER LED Standby mode changes as shown on the right). -
Page 65: Trouvle Shooting
TROUBLE SHOOTING 1 Symptoms and Confirmation Check the following items. If any abnormality is found, consult the dealer from whom you purchased this product or our nearest branch/office. Possible cause/remedy Symptom No image is displayed. • The cable is not correctly connected. •... - Page 66 Symptom Possible cause/remedy • This may be interference fringes between dots of printed matter The image is striped. and TV scanning lines or CMOS pixels. Changing the shooting range may improve the problem. • Vertical stripes may appear on an LCD projector image. Manually adjusting the dot clock at the projector side may improve the problem.
- Page 67 Symptom Possible cause/remedy • Disconnect the USB cable, restart the software, and then connect The UVC image fails to be output. the USB cable again. • If the UVC image still fails to be output after restarting the software, contact the software vendor and ask if the software you are using supports MJPEG.
-
Page 68: When You Have A Problem
• Some operations and functions are restricted in order to stabilize operation during UVC and recording. Check the performance in advance. • We do not guarantee proper operation with all possible combinations of other products and PC software (including ELMO’ s products). Check the performance in advance. - Page 69 SPECIFICATIONS General Item Specifications DC12V（AC adapter AC100 ～ 240V） Power source Power consumption 22W W 349 ×D 377 ×H 435［mm］（when setup） Outside dimensions W 195 ×D 294 ×H 478［mm］（when folded） Weight Approx. 3kg（main body only） Input selection Main / External (x2) RGB output Mini Dsub 15P connector, female x1 Output port HDMI output x1...
-
Page 70: Specifications
Main Camera SPECIFICATIONS General Item Specifications DC12V（AC adapter AC100 ～ 240V） Power source Power consumption 22W W 349 ×D 377 ×H 435［mm］（when setup） Outside dimensions W 195 ×D 294 ×H 478［mm］（when folded） Weight Approx. 3kg（main body only） Input selection Main / External (x2) RGB output Mini Dsub 15P connector, female x1 Output port HDMI output x1... -
Page 71: Main Camera
Main Camera Item Specifications f=4.67mm ～ 52.85mm（12x zoom lens） F3.2 ～ F3.8 Lens Frame rate 30fps, 60fps(only 1080P and 720P supported） From lens surface Limit of focus WIDE 50mm ～∞ adjustment TELE 200mm ～∞ Optical zoom 12 x Digital zoom 16 x Focus Auto (One-push / Zoom sync), Manual... -
Page 72: Trademarks And Licenses
TRADEMARKS AND LICENSES is a trademark or registered trademark of Elmo Co., Ltd. SD, SDXC, SDHC, and logo are trademarks of SD-3C,LLC. HDMI, logo and High-Definition Multimedia interface are trademarks or registered trademarks of HDMI Licensing LLC. All other company/product names described in this manual are trademarks or registered trademarks of their respective companies. - Page 73 TECHNO HORIZON CO.,LTD. テクノホライゾン株式会社 2-13-1 Chikamatori Minami-Ku 〒457-0071 Nagoya, 457-0071, Japan 愛知県名古屋市南区千竈通二丁目１３番地１ https://www.elmo.co.jp OVERSEAS SUBSIDIARY COMPANIES ELMO USA CORP. Headquarters 6851 Jericho Turnpike E-mSuite 145 Syosset, NY 11791 Tel. (516) 501-1400 Fax.(516) 501-0429 E-mail: elmo@elmousa.com Web: http://www.elmousa.com ELMO Europe SAS...
Need help?
Do you have a question about the L-12G and is the answer not in the manual?
Questions and answers