Using This Product; This Product Power; System Indicator Display - Pioneer VREC-DH300D Owner's Manual

Hide thumbs Also See for VREC-DH300D:
Table of Contents

Advertisement

Using this product

Before using this product, first stop the vehicle in a safe location and apply the handbrake.

This Product Power

This product starts when the vehicle's engine is turned on (ACC ON), and it automatically starts
recording. (Video recording)
CAUTION
• When the internal battery is empty or has insufficient charge (insufficient charging, power used up,
etc.), then when starting the vehicle engine, the product may not start. If this product does not start,
then wait approximately 3 minutes with the product charging, then remove and reinsert the cigarette
lighter power cable from the cigarette lighter power socket to restart this product.
Manually Turning the Power On and Off
This product can be manually turned on and off.
On the recording screen, hold down the power button for at least 5 seconds to turn the power off. Never
remove the microSD card while a file save processing message is displayed. Hold down the power
button again for at least 5 seconds, and the power is turned on.

System Indicator Display

The operating status of this product is displayed with the system indicator.
System Indicator
Lit
A. Blinking (slow)
B. Blinking
Off
Blinks per second: A: 1; B: 2
"Using this product" - "Video Recording"
Menu Displayed/
During Playback
− 25 −
Video Recording
Recording Event
Warning

Advertisement

Table of Contents
loading

Table of Contents