Connecting The Power Cable - Pioneer VREC-Z710SH Owner's Manual

Connecting the Power Cable

Be sure to disconnect the ⊖ terminal of the vehicle's battery before connecting the power cable.
By using the power cable to draw power directly from the vehicle, this product can detect and record
vehicle movement caused by vibration even when the vehicle's engine is turned off.
→
"This Product Settings" - "Configurable Features" - "Values" - "Parking Mode" - "Security
Mode"
Black 0.5 m
Yellow 0.5 m
Fuse
(F 2 AL/250 V)
Red 0.5 m
Fuse
(F 2 AL/250 V)
4.5 m
Black 5 m/16 ft. 5 in.
− 22 −