Table of Contents
Advertisement
1.
Remove Lower Anchor
Belt from Storage
Location
Unhook lower anchor
connectors from base by
pressing the red release
button on each connector.
2.
Route Lower Anchor
Belt Through Base Belt
Path
Adjuster
right side of the base as
shown.
Do not twist belt.
3.
Place Base in Vehicle
Rear Facing
Center the base between
the vehicle anchors in the
chosen seating position.
15
MUST
be on the
4.
Attach Lower Anchor
Connector to Vehicle's
Lower Anchor
Review your vehicle owner's
manual for lower anchor
locations and lower anchor
belt use.
Make sure arrows on
connectors are facing up.
Fasten one lower anchor
belt connector to the anchor
located in the vehicle seat
bight. Repeat for other side
of base.
5.
Tighten Belt
Firmly push down and
towards the vehicle seat
back while pulling free end
of belt to tighten.
16
continued on next page
Advertisement
Table of Contents
