Dorel Juvenile Group Information - Maxi-Cosi Mico Series Instructions Manual

Infant car seat base
Table of Contents

Advertisement

5.
Check Belt Tightness
Hold base at the belt path with
your weakest hand.
Push and pull from side to side.
It should not move more than 1
in. (2.5 cm).
If it moves more than 1 in. (2.5 cm),
Reinstalling the base. B. Changing to a different seating
location.
6.
Recheck Level Line
Depending on your Mico
car seat model, the level-
to-ground line can be in
one of two places.
The level line on shell
OR
MUST
ground.
Remove the locking clip when the vehicle seat belt is
not being used with a base or child restraint.
27

Dorel Juvenile Group Information

Thank you for choosing this base. The DJG family is com-
mitted to creating child restraints with the most comfort and
convenience available today.
Remember, parents are a child's first teachers and exam-
ples. If you always buckle your seat belt, your child will
think it is the natural thing to do. Make it a firm rule that the
you can try: A.
vehicle does not go until everyone is buckled up. Make no
exceptions.
No one can predict if use of a child restraint will prevent
injury or death in a particular crash. However, when com-
bined with careful driving, proper use of a child restraint can
lower a child's risk of injury or death in most crashes.
Your child's safety is worth the time it will take to read and
follow these instructions. If you still have questions or have
any concerns with this base please contact our Consumer
Care Department:
be parallel with the
Call: 1-800-951-4113
Text: 1-812-652-2525
Website: www.maxi-cosi.com
Hours of Operation:
M-TH from 8:00 AM to 6:00 PM EST
FRI from 8:00 AM to 4:30 PM EST
28

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mico nxtMico apMico 30Mico max 30

Table of Contents