Table of Contents
Advertisement
6.
Check Belt Tightness
Hold the base at the belt
path with your weakest
hand.
Push and pull from side to
side. It should not move
more than 1 in. (2.5 cm).
If it moves more than 1 in. (2.5 cm),
A. Pulling the belt tighter.
B. Reinstalling the base.
C. Changing to a different seating location.
D. Switching to vehicle belt installation.
7.
With Child Secured in
Child Restraint, Attach
Child Restraint to Base
Pull up on front two corners
of child restraint by child's
feet to make sure it is locked
to the base.
WARNING:
Failure to securely attach child
restraint to base can result in serious injury or
death.
17
you can try:
Carry handle
upright AND locked when
carrying and when
installed in the vehicle.
8.
Check Level Line
Depending on your Mico
car seat model, the level-
to-ground line can be in
one of two places.
Repeat steps 3-8 if level
OR
line is not parallel with the
ground.
Adjust the base if needed.
See page 4 on how to
use the base adjustment.
continued on next page
MUST
be
18
Advertisement
Table of Contents
