Parameter Setting - DEMA IMPERIA Operation And Maintenance Manual

4.2. Parameter setting

Settings menu structure
SETTING
Enter into "SETTING" interface
After switching on the display, briefly press (<0.5S) for two times to enter into the "SETTING"
interface. The interface includes the three options as "Display setting", "Information" and "EXIT".
Briefly press (<0.5S) + or - to switch the options and then briefly press (<0.5S) to confirm and
enter into the option. Select "EXIT" and briefly press (<0.5S) to exit the interface or briefly press
(<0.5S) for two times in any interface to exit the set inface. The set dates are saved for the two exit
mode. If there is no any operation within 20s and then exit the set interface, no any dates are saved.
Enter into "Display setting" interface
In "SETTING" interface, briefly press (<0.5S) + or - to select "Display setting" and then briefly press
(<0.5S) to confirm and enter into "Display setting". There are thirteen set options in the interface.
Briefly press for two times (interval time is less than 0.5S) to exit back to main interface, or
select "BACK" → "EXIT" to back the main interface.
1. Unit
Unit switch between the km and mile. Briefly press (<0.5S) +
or - to select "Unit", and then briefly press (<0.5S) to enter
into the set interface. Briefly press (<0.5S) + or - to select Met-
ric/Imperial, and then briefly press (<0.5S) to save the set and
exit back to Unit interface.
34 EN
Display Setting
Information
EXIT
E-bike operation and maintenance manual
Unit
Brightness
Auto Off
Power View
SOC View
TRIP Reset
AL Sensitivity
Password
Set clock
BACK
Wheel
Speed Llimit
Battery info.
Error Code
BACK
2.
Se
. T
10
bri
3.
Se
(<0
mi
4.
Se
lec
me
mo
(<0
5.
Se
or
mo
Aft
6. T
Se
bri
TR
Aft
7.
Se
(<0
me
lig
an
8.
Ac
(<0
pre
Sta
En
inp
to
ab
wi
au