Normal Operation - DEMA IMPERIA Operation And Maintenance Manual

/ headlight / taillight. There are 5 levels of
ghtness that can be selected by
backlight brightness that can be selected by
he display is turned on in a dark
the user. (If the display is turned on in a dark
, the display backlight / head-

4.1. Normal operation

environment, the display backlight / head-
ht will be turned on automati-
light / taillight will be turned on automati-
ON/OFF Switch
isplay backlight / headlight / tail-
Turn on the power, press and hold (>2S)
cally. If the display backlight / headlight / tail-
Press and hold (>2S)
ned off manually, they also need
can be set in "Auto Off") the display will be automatically turned off. If the password function of the
light are turned off manually, they also need
on manually afterwards)
display is activated, need to input the correct password to enter into the normal display interface.
to be turned on manually afterwards)
Headlight / Display Backlight Switch
Press and hold (>2S)
well as headlight. Press and hold (>2S)
the display backlight and the headlight. There are 5 levels
of backlight brightness that can be selected by the user
(can be set in the"Brightness"). (If the display is turned
on in a dark environment, the display backlight/headlight
will be turned on automatically. If the display backlight/
headlight are turned off manually, they also need to be
turned on manually afterwards).
Power assistance level selection
In the manual gearshift mode, briefly press (<0.5S) + or
- to switch the level to change the assistance power,
The lowest level is Level 0, the highest Level 5. When
tance
the display is on, the default mode is Level 1,"0"means
• Walk Assistance
no power assistance.
2 seconds. The e-bike enters
Press for 2 seconds. The e-bike enters
stance mode, and the symbol
the walk assistance mode, and the symbol
played. Once the key
Press and hold (>2S) + to switch riding mode into
WALK is displayed. Once the key
„ECO" or „SPORT".
e-bike will exit the walk as-
released, the e-bike will exit the walk as-
de.
sistance mode.
Push assistance mode
Press and hold (>2S) - to enter into push assistance
mode, the symbol
will exit the push assistance the mode.
Multiple function interfaces switch
Briefly press (0.5s) to switch to different data interface, circularly show signal-trip distance
(TRIP) → total distance (ODO) → maximum speed (MAX) → average speed (AVG) → remain-
ing distance (RANGE) → energy consumption (CALORIES) → time (TIME). Energy consump-
tion unit CALORIES means kCal.
1
ANUAL DP C10.UART
DISPLAY MANUAL DP C10.UART
again to power off the display. If the bike is not used, after 5 minutes (time
to turn on the display backlight as
is
is displayed. When release key -,
E-bike operation and maintenance manual
to power on the display, the display begin to operate.
again to turn off
is
EN 33