Unpair From A Bluetooth Device - Kyocera DURAXV EXTREME+ User Manual

2. Highlight the device name you want to connect and press the Center soft key
[Select]. Your phone then automatically tries to pair with it.
3. If prompted, enter the passcode supplied with the connecting device, and then press the
Left soft key
To change the connection settings, select Paired devices, highlight the connected

device name and press the Right soft key
▪ Highlight the Name field to change the connected device name.
Mark or unmark the Use for check boxes to set the connection type.
▪
▪ Press the Right soft key
The pairing and connection status is displayed below the device name in the Paired devices list.
When the Bluetooth headset or car kit is connected to your phone, the Bluetooth connected icon
is displayed in the status bar.
Note: Due to different specifications and features of other Bluetooth-compatible devices,
display and operations may be different, and functions such as transfer or exchange
may not be possible with all Bluetooth-compatible devices.

Unpair from a Bluetooth device

Unpairing from other devices makes your phone forget its pairing connection with them. To
connect to the other devices again, you may need to enter or confirm a passcode again.
Disconnect a Bluetooth device
1. From the Bluetooth screen, select Paired devices.
2. Highlight the device you want to disconnect and press the Center soft key
> OK.
Unpair from a Bluetooth device
You can make your phone forget its pairing connection with another Bluetooth device. To
connect to the other device again, you may need to enter or confirm a passcode again.
1. From the Bluetooth screen, select Paired devices.
2. Highlight the device you want to unpair, press the Right soft key
press the Right soft key
Connections
[Pair].
[Forget].
[Edit].
[Forget] to remove the connection.
59
[Select]
[Edit], and then