Bluetooth; Turn Bluetooth On Or Off; Change The Device Name; Pairing (Connect To Other Devices) - Kyocera DURAXV EXTREME+ User Manual

Hide thumbs Also See for DURAXV EXTREME+:

Table of Contents

Saved networks to display the saved networks list.



Bluetooth

Bluetooth is a short-range communications technology that allows you to connect wirelessly to a

number of Bluetooth devices, such as headsets, hands-free car kits, and Bluetooth-enabled

handhelds, computers, printers, and wireless phones. The Bluetooth communication range is

approximately 30 feet.

► From the Idle screen, press the Center soft key

Settings > Wireless & networks > Bluetooth to open the Bluetooth screen.

Use the settings menu to enable or disable your phone's Bluetooth capabilities.

1. From the Bluetooth screen, select Bluetooth.

2. Highlight On or Off and press the Center soft key

Note: Turn off Bluetooth when not in use to conserve battery power, or in places where using a

wireless phone is prohibited, such as aboard an aircraft and in hospitals.

The device name identifies your phone to other devices.

1. From the Bluetooth screen, select Device name.

2. Edit the name for your phone in the dialog box, and press the Center soft key

[Rename].

Pairing with other devices makes your phone ready for connecting to them.

Note: Other devices' Bluetooth must be turned on before pairing.

Important: Perform the pairing process at a secure location.

Important: Bluetooth accessories/peripherals MUST have a passkey to work with the mobile

device. If you need to pair with a device without a pre-defined passkey, it is

recommended to use a passcode of at least eight digits.

1. From the Bluetooth screen, select Pair new device. Your phone will show a list of

nearby Bluetooth devices.

If Bluetooth is not switched on, select Bluetooth > On to turn Bluetooth on.



[Menu] > Settings & tools >

[Set] to turn Bluetooth on or off.

Connections

Table of Contents