Battery Capacity; Remove The Battery - Kyocera DURAXV EXTREME+ User Manual

Hide thumbs Also See for DURAXV EXTREME+:
Table of Contents

Advertisement

3. Plug the other end of the USB cable into the AC adapter, and then plug it into an
electrical outlet. Be sure to use the AC adapter that came with your phone.
4. When charging is complete, remove the cable from the port and close the cover. Press
around the edges of the cover to ensure that it is securely closed.
Warning: Make sure the USB/Charger port cover is securely closed when the port is
not in use.

Battery capacity

Your phone is equipped with a Lithium ion (Li-ion) battery, so there are no negative effects from
charging the battery before it is fully drained.
For a quick check of your battery level, view the battery charge icon located on the right side of
the status bar.
indicates that the phone is fully charged. The number of white bars
decreases as your battery discharges (
15%), the battery icon turns to
a low battery message. When the battery drops to a more critical level (approx. 5%), the battery
icon turns to
and starts blinking. The alert tone, vibration, and message will repeat when the
remaining battery reaches each lower level.
Note: Watch your phone's battery level and charge the battery before it runs out of power.

Remove the battery

If you need to remove the Battery, follow these steps:
1. Make sure the power is off so that you don't lose any stored numbers or messages.
2. Insert a coin into the slot on the battery cover screw and turn it counter-clockwise to
open the battery cover.
3. Starting at the edge of the sticker, peel the visible portion until it is standing up from the
battery; then, use this portion to pull the battery out of its compartment.
Get Started
). When your battery level becomes low (approx.
and the phone sounds a warning tone, vibrates, and displays
9

Advertisement

Table of Contents
loading

Table of Contents