Figure 15 Connection To Automatic Detergent And Quick-Dry Agent Distributors; Figure 16 Connection To Power Supply Of Dosage Distributor - Electrolux EUC40G1 Instruction Manual

Table of Contents

Advertisement

maintained after the machine has not been
used for a long time.
1. Dishwasher without built-in detergent
distributor (optional or configured by
user) (Figure 15)
The user may use optional dosing distributor with
automatic detergent distribution (Figure 15).
When the machine is in every washing cycle, the
"S" dose is pumped into the water tank. If it is
configured by the user, follow the connection
instructions of Figure 15. The "R" is the detergent
inlet. The hose on the one end is connected to the
"S" and that on the other end is inserted into the
dose vessel.
2.
Dishwasher
with
quick-dry agent distributor (Figure 15)
The machine is provided with siphon-type
quick-dry agent distributor. The Customer may
adjust the dosing distribution with knob. If the
dosage distributor is configured by the Customer,
follow the connection instructions as shown in
Figure 15. The "T" is quick-dry distributor. The
hose on the one end is connected to the "0" and
that on the other end is connect to the quick-dry
dose vessel.
Figure 15 Connection to Automatic Detergent and
Quick-Dry Agent Distributors
built-in
siphon-type
Power
Supply
Distributor and Rinse Aid Distributor
The circuit board is provided with 220-240V/2A
power supply terminal for external distributor.
Figure 16 Connection to Power Supply of Dosage
1. The detergent distributor is connected between
terminals " 403 " and " 2 " . These terminals are
activated in each washing cycle.
2. The quick-dry agent is connected between
terminals " 407 " and " 2 " . (They will not be
connected if the built-in siphon-type distributor
is used). It is only used for the distributor of
creeping pump configured by the Customer.
These terminals are activated in each washing
cycle.
Change type of detergent/rinse-aid agent
If you want to change various types of
detergent/quick-dry agent (even if from the same
manufacturer), when you are connecting new
detergent/quick-dry agent vessel, you must flush
the sucking and pressure hoses.
Important Information!
The mixing of various detergent/quick-dry
agent will cause crystallization, possibly
resulting in clogged and damaged pipelines.
Failure to follow this condition will void
warranty and product liability.
26
Connection
to
Detergent
Distributor

Advertisement

Table of Contents
loading

Table of Contents