I6 Operation - Electrolux EUC40G1 Instruction Manual

If the boiler water does not reach minimum
temperature needed, the washing time will be
extended.
I6 Operation
The machine has been finished heating and filling
if the indicator light of operating condition is ON in
green.
The equipment is ready for use:
•
Open the equipment door.
•
Fill the water tank with needed amount of
detergent (for a machine without automatic
distributor).
•
Place the dishes on the rack in a good order,
avoiding decorated bowls, dishes, and
silverware in contact with other metals during
washing, and avoiding residuals on the
dishes become dry.
Important Information!
Removal large-size residuals on the dishes to
avoid filter clogging.
•
Without any detergent, the dishes are
sprayed for pre-washing with cold or warm
water.
•
Insert the bowl basket with dirty dishes.
•
Close the cover. Then select proper washing
cycle and corresponding indicator light will be
ON.
Washing Cycles Available:
- Washing Cycle 1
Suitable for washing glasses, tableware made of
glass.
- Washing Cycle 2
Suitable washing ceramic cups/dishes, tableware
made of ceramic.
- Washing Cycle 3
Suitable washing ceramic dishes/bowls, very dirty
ceramic-made tableware.
•
Press the "Start" key to start the washing
operation and the indicator light is ON in
blue.
•
Press the "Start" key to stop the washing
cycle. The washing operation will be stopped
if the door is opened during washing
operation.
•
Press again the "Start" key to continue the
washing cycle.
•
Open the cover and take out the dish basket
31