Table of Contents
Advertisement
E6.2 "Installation Drawing")to the manifold drain
pipe. Install the trap or place the drain pipe into
the S-shaped trap on the floor.
E6.1
Pipelines
Pipeline diagram, with drainage pump
LEGEND:
WI= Water inlet
M2= Drainage pump
M1= Washing pump
D= Water drainage
YV1= Inlet electromagnetic valve
E6.2
Installation Drawing
The following installation drawing shows the
outlined machine dimensions and connection to
water and electricity.
Important Information!
Ensure that an extraction hood is
installed to remove steam from the
machine.
The calculation of air flow must take
into account the machine installation
type and work environment where the
machine is installed.
In any case, the recommended air
flow rate is 1000 to 1500 cubic meters
per hour.
12
Advertisement
Table of Contents
