Using The Tv's Features; Adjusting The Channel Settings; Switching Between Two Channels; Programming Your Favorite Channels - Toshiba 36HF72 Owner's Manual

Using the TV's features

Adjusting the channel settings

Switching between two channels

You can switch between two channels without entering an actual
channel number each time.
To switch between two channels:
1. Select the first channel you want to view.
2. Select a second channel using the Channel Numbers (0–9, 100).
3. Press CH RTN. The previous channel will display.
Each time you press CH RTN, the TV will switch back and forth
between the last two channels you tuned the TV to.

Programming your favorite channels

The favorite channel feature allows you to use the FAV z/FAVy keys
to cycle through your favorite channels only, skipping over channels
you do not usually watch.
You can program up to 12 of your favorite channels into the favorite
channel memory.
To program a channel into the favorite channel memory:
1. Tune the TV to a channel you want to program as a favorite
channel.
Note: The TV must be in "CABLE" mode to program a cable
channel and in "TV mode" to program an antenna channel.
Select TV/CABLE in the SET UP menu.
2. Press MENU, and then press x or • until the SET UP menu
appears.
3. Press y or z to highlight FAVORITE CH, and then press • to
open the FAVORITE CH menu.
4. Press x or • to highlight SET, press z, and then press EXIT.
SET UP
MORE
V-CHIP CONTROL
FAVORITE CH
CH LABEL
TIMER: 0 MIN
MORE
[ ]
MOVE [ ] START
5. Repeat steps 1–4 for up to 12 channels.
To select your favorite channels:
Press FAV z or FAVy on the remote control.
Note: You can still use CH yz to cycle through the channels you
programmed into the "regular" channel memory on page 19.
To clear a channel from the favorite channel memory:
1. Tune the TV to a channel you want to clear from the
favorite channel memory.
2. Press MENU, and then press x or • until the
SET UP menu appears.
3. Press y or z to highlight FAVORITE CH, and then
press • to open the FAVORITE CH menu.
4. Press x or • to highlight CLEAR, press z, and then press EXIT.
5. Repeat steps 1–4 for other channels you want to clear from the
favorite channel memory.
SET UP
FAVORITE CH
[SET ] CLEAR
11
2 5 6
0 0 0 0
0 0 0 0
[TV: CYAN, CABLE: BLUE]
SELECT [ ] [ ]
SET
SET UP
FAVORITE CH
2
0
0
[TV: CYAN, CABLE: BLUE]
SELECT [
z
* The FAV / FAV
as menu x / • keys when a
menu is on-screen.
Note:
• Once programmed, antenna channels
appear in light blue text and Cable
channels appear in dark blue text in the
FAVORITE CH menu (shown at left).
SET [CLEAR]
0
5 6
0 0 0
0 0 0
] [ ]
CLEAR
Channel
Numbers
CH RTN
MENU
FAV z/FAVy*
EXIT
CH yz
y
keys function
23