Connecting A Camcorder; Connecting An Audio System - Toshiba 36HF72 Owner's Manual

Connecting a camcorder

This connection allows you to watch videos recorded on a camcorder.
You will need:
• one set of standard A/V cables (see notes at right)
TV front panel
VIDEO-3 IN
S-VIDEO VIDEO L/MONO-AUDIO-R

Connecting an audio system

This connection allows you to use an audio amplifier to adjust the
audio level. This connection also allows you to use external speakers.
To control the audio, turn on the TV and the stereo amplifier, and
turn off the built-in speakers. (See"Turning off the built-in speakers"
on page 39.)
You will need:
• one coaxial cable
• one pair of standard audio cables
TV
From Cable,
Cable Box, ANT( 75
or Antenna
12
Camcorder
VIDEO AUDIO
OUT
L
R
DEMO MENU TV/VIDEO VOLUME
Amplifier
LINE IN
L R
COLOR
S-VIDEO
STREAM
INPUT
Y
VIDEO
VIDEO
)
L /
L /
P
B
MONO L MONO
AUDIO AUDIO
P R AUDIO
VAR/FIX
R R
R
VIDEO 1 VIDEO 2
IN DVD IN OUT
Note:
• For better picture quality, if your camcorder
has S-video, you can use an S-video cable
(plus the standard audio cables) instead of a
standard video cable.
• Do not connect both a standard video cable
and an S-video cable at the same time, or
the picture performance will be
unacceptable.
CHANNEL
Note:
• When using an external audio amplifier, if
you set AUDIO OUT to VARIABLE, the
volume of both the TV and amplifier must
be set above 0 (zero) or you will not hear
any sound. See "Selecting fixed/variable
AUDIO OUT" on page 39.
• If you set AUDIO OUT to VARIABLE, the
TV's volume controls will adjust the volume.
If you set AUDIO OUT to FIXED, you must
use the amplifier's volume controls
to adjust the volume. See "Selecting
fixed/variable AUDIO OUT" on page 39.