SRC H-AFT18-01-01-SL Mounting Instructions page 4

Step 2:
Mounting the Upper Bracket (5)
and the Windshield Guard (back in
its position)
Orient and Align the Upper
Bracket and Windshield Guard, as
shown in the drawing, Slide in the
Mounting Screws of the
Windshield Guard and secure the
threads and tighten it fully.
Slide in the Mounting Pin (3) – 2
off and Grommet (2) – 2 off as
shown, in the upper bracket (This
can be done off-line too)
Copyright By SRC
Design and Specification are subjected to change
Step 1:
Unscrew the two mounting
screws of the Windshield Guard
to enable access and fitment of
the upper bracket (5)
Page 4