Page 1
6 Nut M6 9-10 Use Liquid Thread Locker SRC Design uses Metric System of Measurement and all dimensions are in Millimeters * Recommended to use the Torque specified in the table ** Denotes Usage of Liquid Thread Locker in specified locations...
MOUNTING DRAWINGS Copyright By SRC Design and Specification are subjected to change Page 2...
Page 3
Stand. The side stand can be brought forward (position as shown in the drawing) to have access to the Mounting/ Assembly of the SRC Large Side Stand. Step 2: Slide-in the Middle Plate (2), as shown. Its inner walls, closely hugs the outer walls of the Side stand.
Page 4
4 Projecting screws. Secure the threads on the screw using M6 Nut (6), as shown. As shown in the left, is the Final Mounted condition of the Side Stand Copyright By SRC Design and Specification are subjected to change Page 4...
Vehicle. It is always advised to check loosening of the fasteners after the first 50 kilo meters of ride and at regular intervals. 7. We are showing here the Scope of Supply/ Installation/Parts list & BOM from SRC 8. To the maximum extent possible, our design use the current Mounting/Fitment of the...