SRC H-AFT18-01-01-SL Mounting Instructions page 5

Step 3:
Mounting of the Lower Bracket
(4).This takes the mounting hole
available in the Motorbike (as shown
in the drawing).
Orient and align the Lower Bracket,
and slide in the Spacer (6) – 2 off,
Washer M6 (7) – 2 off, Screw M6 x 20
(9) – 2 off, and secure the threads
using Nut M6 (11) – 2 off from the
other side.
Slide in the Mounting Pin (3) – 2 off
and Grommet (2) – 2 off as shown, in
the upper bracket (This can be done
off-line too)
Copyright By SRC
Design and Specification are subjected to change
The Upper Bracket and Windshield
Guard shown in "As is mounted
condition"
Page 5