A 4599 And A 4599V Remote Plate - Redback A 4505C Operating Manual

Redback® A 4505C Lockdown Timer with Network Access
The Lockdown/Fire/Cancel switches on the Redback® A 2064 wall plate are connected to the corresponding
contacts on the rear of the Redback® A 4505C. While the Lockdown and Fire LED's on the wall plate are connected to the
Lockdown and Fire 24V outputs of the Redback® A 4505C.
A mimimum of six wires can be used on the A 2064 if the ground connections of the Lockdown and Fire 24V outputs and
the Lockdown/Fire and cancel switch grounds are linked together (see Fig 4.2).
The Lockdown/Fire/Chime/Cancel switches on the Redback® A 2069 wall plate are connected to the corresponding
contacts on the rear of the Redback® A 4505C. While the Lockdown, Fire and Bell LED's on the wall plate are connected
to the Lockdown, Fire and Bell 24V outputs of the Redback® A 4505C.
The cancel LED is not connected.
A mimimum of eight wires can be used if the ground connections of the Lockdown, Fire and Bell 24V outputs are linked
with the Lockdown, Fire, Chime and Cancel switch grounds (see Fig 4.2).
4.2 A 4599 and A 4599V Remote Plates
The Reback® A 4599 and A 4599V wall plates allow a remote means of triggering the Lockdown, Fire and Bell tones
and the cancel function. The switches are momentary operation and must be pressed for up to 3 seconds to activate. The
switches have protective "flip up" covers to prevent accidental operation.
16 Redback® Proudly Made In Australia
A 4505B LOCKDOWN TIMER
Cancel Fire
Trigger Trigger
A 2069 REMOTE WALL PLATE
Fig 4.2 Hard wired connection between the A 2069 and A 4505C
Fig 4.3 A 4599
Common Fire Lockdown
24V Out 24V Out 24V Out
Lockdn Bell
Trigger Trigger
Outputs limited to 120mA maximum current draw
a c E v t e r A l
- + - +
- +
Cancel Chime Evac Alert Chime Evac Alert
Switch Switch Switch Switch Lamp Lamp Lamp
l c e a n C e m h i C
Fig 4.4 A 4599V
Bell
24V Out
www.redbackaudio.com.au