A 4599 And A 4599V Remote Plate - Redback A 2064 Operating Manual

3.2 A 4599 and A 4599V Remote Plates
The Reback® A 4599 and A 4599V wall plates allow a remote means of triggering the Lockdown, Fire and Bell tones
and the cancel function. The switches are momentary operation and must be pressed for up to 3 seconds to activate. The
switches have protective "flip up" covers to prevent accidental operation.
Fig 3.3 A 4599
Connection is made to the Reback® A 4505B via standard Cat5e cabling as shown in Fig 3.5. There are two RJ45 ports on
the rear of the wall plate, either of which can be used.
Only one Reback® A 4599 or A 4599V wall plate is allowed to be connected to the Reback® A 4505B via the RJ45 port.
A 4599 Remote
Wall Plate
CAT5e cable
(Max 300 Metres)
IMPORTANT NOTE
Ensure power is switched off when
adjusting DIP switches. New
24V 24V
settings will be effective when
power is switched back on.
DC In DC In
DIP Switches
1 2 3 4 5 6 7 8
To Wall Plate
- +
1 2 3 4 5 6 7 8
www.redbackaudio.com.au
Redback® A 4505B Lockdown Timer
Alert Evac
Chime Cancel
Cancel Fire Lockdown Bell
Mic
Trigger Trigger Trigger Trigger
Volume
To Paging
Console
Fig 3.5
Fig 3.4 A 4599V
Common Fire Lockdown Bell
24V Out 24V Out 24V Out 24V Out
Adapter
Outputs limited to 120mA maximum current draw
Redback® Proudly Made In Australia 21
Lock/Fire Bell Music V/Over
Level Level Level Level
ON
CR2032
OFF
Battery
Backup Battery Holder
Backup
(Use 3V CR2032 Battery Only)
L
Prebell
Level
R
Audio
Out