Rear Panel Connections - Redback A 4505C Operating Manual

Lockdown timer with network access
Hide thumbs Also See for A 4505C:
Table of Contents

Advertisement

Redback® A 4505C Lockdown Timer with Network Access

1.5 REAR PANEL CONNECTIONS

Fig 1.5 shows the layout of the A 4505C rear panel.
IMPORTANT NOTE
Ensure power is switched off when
adjusting DIP switches. New
24V
24V
settings will be effective when
power is switched back on.
DC In
DC In
DIP Switches
1
2
3
4
5
6
7
8
To Wall Plate
-
+
1 2 3 4 5 6 7 8
23
21
22
20
1
Common 24V Out
This is a common 24V DC output which is activated when any of the Prebell, Bell, Music, Lockdown or Fire tones
are activated. The terminals provided can be used for "Normal" or "Failsafe" modes (see section 2.12 for more
details).
2
Fire 24V Out
This is a 24V DC output which is activated when the Fire tone is activated. The terminals provided can be used
for "Normal" or "Failsafe" modes (see section 2.12 for more details).
3
Lockdown 24V Out
This is a 24V DC output which is activated when the Lockdown tone is activated. The terminals provided can be
used for "Normal" or "Failsafe" modes (see section 2.12 for more details).
4
Bell 24V Out
This is a 24V DC output which is activated when the Bell tone or relay only (No MP3 option) is activated. The
terminals provided can be used for "Normal" or "Failsafe" modes (see section 2.12 for more details).
5
Network Adapter
This RJ45 port is for connection of a Redback® proprietry adaptor board. This allows connection to an ethernet
network. The Redback A 4498 Network connection pack is required (see section 3.0 for details).
6
Backup Battery Switch
Use this switch to activate the backup battery. (Note: The backup battery only backs up the current time).
7
Backup Battery
Replace this battery with a 3V CR2032 only. Remove by pulling the battery.
Note: The positive side of the battery faces upward.
8
Lockdown/Fire Volume
Adjust this trimpot to adjust the Alert and Evacuation tones playback volume.
9
Bell Volume
Adjust this trimpot to adjust the Bell playback volume.
10
Music Volume
Adjust this trimpot to adjust the Music playback volume.
11
Voice-over Volume
Adjust this trimpot to adjust the message voice-over playback volume.
12
PreBell Volume
Adjust this trimpot to adjust the PreBell playback volume.
6
Redback® Proudly Made In Australia
1
Common
24V Out
Cancel
Fire
Lockdown
Bell
Mic
Trigger
Trigger
Trigger
Trigger
Volume
To Paging
Console
Outputs limited to 120mA maximum current draw
14
16
19
18
17
15
2
3
4
5
6
Fire
Lockdown
Bell
24V Out
24V Out
24V Out
ON
OFF
Battery
Adapter
Backup
(Use 3V CR2032 Battery Only)
Fig 1.5
7
8 9 10 11 12 13
L
Lock/Fire
Bell
Music
V/Over
Prebell
Level
Level
Level
Level
Level
CR2032
R
Audio
Backup Battery Holder
Out
www.redbackaudio.com.au
Manufactured in Australia
By Altronic Distributors Pty. Ltd.
www.redbackaudio.com.au

Advertisement

Table of Contents
loading

Table of Contents