Power On The Instrument - Tektronix BSA85C Quick Start User Manual

Power on the instrument

The following sections assumes that you have properly connected the input and output cables to the instrument before you
power on the instrument.
1. Connect the power cord to the rear of the
instrument and to a properly grounded
power source.
2. Push the front panel power button to turn
the instrument on.
The green power indicator on the button
will turn on and the instrument will begin
the startup process.
The instrument performs a self-test at
start-up. If any tests fail, the tests are listed
in the Self Test dialog box. Contact Technical
Support for information on any failed tests
and for recommended action.
After the instrument completes the start-up
sequence, the Home view displays.
From the Home view, access other menus of
the instrument by touching the View button.
The contents of the list under the View menu
depend on the options and configuration of
your instrument.
Tektronix BERTScope Bit Error Rate Analyzers Quick Start User Manual
Installation
3